- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
This Current Probe is designed for use in utility and industrial environments. The unique ergonomic design allows it to easily clamp onto cables or small bus bars. It is assembled to the highest safety and performance standards including the CE Mark and is UL approved for Canada and United States.
This Current Probe is designed for use in utility and industrial environments. The unique ergonomic design allows it to easily clamp onto cables or small bus bars. It is assembled to the highest safety and performance standards including the CE Mark and is UL approved for Canada and United States.
This general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp measured in the jaw. The SR704 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift and wide frequency response are important.
Features
Applications
| Nominal Range | 1000A |
| Measurement Range | 1mA to 1200A |
| Transformation Ratio | 1000:1 |
| Output Signal | 1mA AC/A AC (1A AC at 1000A) |
| Accuracy (1000A Range) | 1mA to 100mA: ≤3% of Reading ± 5µV 0.1 to 1A: ≤2% of Reading ± 3µV 1 to 10A: <1% of Reading ± 0.2mV 10 to 100A: ≤0.5% of Reading 100 to 1200A: ≤0.3% of Reading |
| Phase Shift (1000A Range) | 1 to 10A: ≤2° 10 to 100A: ≤1° 100 to 1200A: ≤0.7° |
| Overload | 1200A for 40 min ON, 20 min OFF |
| Frequency Range | 30Hz to 5kHz |
| Load Impedance | 5Ω max |
| Working/Common Mode Voltage | 600Vrms Cat. III |
| Output Termination | 5ft Lead |
| Nominal Range | 1000A |
| Measurement Range | 1mA to 1200A |
| Transformation Ratio | 1000:1 |
| Output Signal | 1mA AC/A AC (1A AC at 1000A) |
| Accuracy (1000A Range) | 1mA to 100mA: ≤3% of Reading ± 5µV 0.1 to 1A: ≤2% of Reading ± 3µV 1 to 10A: <1% of Reading ± 0.2mV 10 to 100A: ≤0.5% of Reading 100 to 1200A: ≤0.3% of Reading |
| Phase Shift (1000A Range) | 1 to 10A: ≤2° 10 to 100A: ≤1° 100 to 1200A: ≤0.7° |
| Overload | 1200A for 40 min ON, 20 min OFF |
| Frequency Range | 30Hz to 5kHz |
| Load Impedance | 5Ω max |
| Working/Common Mode Voltage | 600Vrms Cat. III |
| Output Termination | 5ft Lead |
