Offers thinner jaws over standard clamp meters.; allowing access to tight measurement areas and still accommodating conductors up to 25 mm. It also measures Capacitance and Frequency; which is measured by either jaws or test leads.
Offers thinner jaws over standard clamp meters.; allowing access to tight measurement areas and still accommodating conductors up to 25 mm. It also measures Capacitance and Frequency; which is measured by either jaws or test leads.
Features
Display | 3-3/4 digits 4000 counts LCD display |
Update Rate | 3 per second nominal |
Operating Temperature | 0°C to 40°C; < 80% RH for temperature up to 31°C decreasing linearly to 50% RH at 40°C |
Altitude | Operating below 2000m; Indoor use |
Temperature Coefficient | Nominal 0.15 x (specified accuracy)/ °C @ (0°C ~ 18°C or 28°C ~ 40°C) |
Low Battery | Below approx. 2.4V |
Power Consumption | 2.8 mA typical except that 3.3 mA typical for ACA function |
APO Timing | Idle for 30 minutes |
APO Consumption | 5 μA typical |
Jaw opening & Conductor diameter | max 26 mm |
Special Features | 30ms Max Hold; Data Hold; Relative Zero mode |
Power Supply | 3V coin battery IEC-CR2032 |
Dimension | 7.4 x 2.5 x 1.3" (190 x 63 x 32 mm) |
Weight | 139 g approx |
Display | 3-3/4 digits 4000 counts LCD display |
Update Rate | 3 per second nominal |
Operating Temperature | 0°C to 40°C; < 80% RH for temperature up to 31°C decreasing linearly to 50% RH at 40°C |
Altitude | Operating below 2000m; Indoor use |
Temperature Coefficient | Nominal 0.15 x (specified accuracy)/ °C @ (0°C ~ 18°C or 28°C ~ 40°C) |
Low Battery | Below approx. 2.4V |
Power Consumption | 2.8 mA typical except that 3.3 mA typical for ACA function |
APO Timing | Idle for 30 minutes |
APO Consumption | 5 μA typical |
Jaw opening & Conductor diameter | max 26 mm |
Special Features | 30ms Max Hold; Data Hold; Relative Zero mode |
Power Supply | 3V coin battery IEC-CR2032 |
Dimension | 7.4 x 2.5 x 1.3" (190 x 63 x 32 mm) |
Weight | 139 g approx |