This is a pneumatically-operated instrument for measuring breaking strength of electrical leads, terminals, connectors, wire wraps, etc. It is ideal for areas where intrinsic safety is required. This is capable of either tensile or compression testing.
This is a pneumatically-operated instrument for measuring breaking strength of electrical leads, terminals, connectors, wire wraps, etc. It is ideal for areas where intrinsic safety is required. This is capable of either tensile or compression testing.
The TT Series pneumatic tester for measuring breaking strength is ideal for areas where intrinsic safety is required. This pneumatic tester is available in two models: one with a foot-actuated switch and one with a hand actuated switch.
FeaturesThe Chatillon TT Series is a pneumatically-operated tester for measuring breaking strength of electrical leads, terminals, connectors, wire wraps, etc. When used with a mechanical gauge, it is ideal for areas where intrinsic safety is required.
This pneumatic tester can be used for tensile or compression testing. The rapid test speed makes it ideal for production line testing, incoming inspection testing, or for the R&D laboratory.
The pneumatic tester features a 6-inch (15 cm) test stroke and Ram speed may be controlled as low as 0.1-inch (2.5 mm) per minute.
The tester operates using clean, dry air with a maximum air pressure up to 160 psig (11.2 bar). It meets MIL-T-7928 (ASG) requirements for crimped, solderless lugs.
Load Capacity | 500 lbf, 2.5 kN |
Sample Size | Up to 15 inch (380 mm)
7/32 OD |
Crosshead Speed | 6 in/min |
Travel | 6 inches (152 mm)
7/32 inch (5.6 mm) 1/2 inch (12 mm) |
Load Measurement | Chatillon DF Gauges |
Air Motor | For 225 lbf (1 kN): Requires 60 psi (4.2 bar)
For 550 lbf (2.5 kN): Requires 125 psi (8.7 bar) |
Operating Temperature | 40 to 110°F (5 to 45°C) |
Instrument Weight | 50 lbs (25 kg) |
Shipping Weight | 65 lbs (30 kg) |
Load Capacity | 500 lbf, 2.5 kN |
Sample Size | Up to 15 inch (380 mm)
7/32 OD |
Crosshead Speed | 6 in/min |
Travel | 6 inches (152 mm)
7/32 inch (5.6 mm) 1/2 inch (12 mm) |
Load Measurement | Chatillon DF Gauges |
Air Motor | For 225 lbf (1 kN): Requires 60 psi (4.2 bar)
For 550 lbf (2.5 kN): Requires 125 psi (8.7 bar) |
Operating Temperature | 40 to 110°F (5 to 45°C) |
Instrument Weight | 50 lbs (25 kg) |
Shipping Weight | 65 lbs (30 kg) |