Provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. It features a ½ to 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections. The transducer is ideal for abrasive and/or corrosive melt-pressure applications requiring simple installation, repeatability, and reliability.
Provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. It features a ½ to 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections. The transducer is ideal for abrasive and/or corrosive melt-pressure applications requiring simple installation, repeatability, and reliability.
The abrasive and corrosive melt pressure transducer has an accuracy better than ±1%.
Features
Applications
Pressure Range | 1,000 to 30,000 psi |
Transducer Configuration | Rigid stem with flexible capillary |
Snout Length | 6" (15 cm) |
Snout Length | 18" (46 cm) Flex |
Combined Error | ±1% FSO, (Including Linearity, Repeatability & Hysteresis) |
Repeatability | ±0.2% FSO |
Maximum Pressure | 2 x full range or 35,000 psi (whichever is less) |
Configuration | Four active arm bonded Wheatstone bridge strain gage |
Bridge Resistance | Input: 345 Ohms minimum; Output: 350 Ohms ±10% |
Output | 3.33 mV/V ±2.0% |
Zero Balance | ±10% full scale |
Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
Internal Shunt Calibration (R-Cal) | 80% FSO ±1.0% |
Insulation Resistance | 1,000 megohms at 50 Vdc |
Maximum Diaphragm Temperature | 750°F (400°C) |
Standard Wetted Parts | Inconel 718 |
Pressure Range | 1,000 to 30,000 psi |
Transducer Configuration | Rigid stem with flexible capillary |
Snout Length | 6" (15 cm) |
Snout Length | 18" (46 cm) Flex |
Combined Error | ±1% FSO, (Including Linearity, Repeatability & Hysteresis) |
Repeatability | ±0.2% FSO |
Maximum Pressure | 2 x full range or 35,000 psi (whichever is less) |
Configuration | Four active arm bonded Wheatstone bridge strain gage |
Bridge Resistance | Input: 345 Ohms minimum; Output: 350 Ohms ±10% |
Output | 3.33 mV/V ±2.0% |
Zero Balance | ±10% full scale |
Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
Internal Shunt Calibration (R-Cal) | 80% FSO ±1.0% |
Insulation Resistance | 1,000 megohms at 50 Vdc |
Maximum Diaphragm Temperature | 750°F (400°C) |
Standard Wetted Parts | Inconel 718 |