Performs in harsh, dirty, and hazardous industrial conditions, users can test everything from micro-electronics to power electronics applications. This ScopeMeter® combines highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Additionally, it is ideal for troubleshooting as well.
Performs in harsh, dirty, and hazardous industrial conditions, users can test everything from micro-electronics to power electronics applications. This ScopeMeter® combines highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Additionally, it is ideal for troubleshooting as well.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
A combination of the highest safety ratings and rugged portability with the performance capabilities of a bench oscilloscope. This ScopeMeter is designed to work in harsh, dirty, and hazardous industrial conditions for users to test everything from micro-electronics to power electronics applications making it ideal for maintenance engineers and technicians.
It includes a multimeter, TrendPlot™, and ScopeRecord™ roll paperless recorder modes and hands-free operation with Connect-and-View™ triggering.
Features
20 years of ScopeMeter® test tool innovation
As the first two-channel portable scope safety rated CAT III 1000 V / CAT IV 600 V, this ScopeMeter® combines an unprecedented level of performance, ruggedness, and portability with 60MHz bandwidth and real-time sampling rates up to 625 MS/s and 200 ps resolution to capture noise and other disturbances. This model feature deep memory up to 10,000 samples per channel; so you can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. This test tool is hand-held battery operated, designed to meet the demands of field service professionals.
Gain four times the diagnostic power plus CAT IV safety rating
A double-insulated two -channel floating oscilloscopes safety rated for measurements in CAT III 1000V/CAT IV 600V environments.
Three-dimensional testing for industrial systems
Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:
Three-phase testing for diagnosing VSD, power inverters, and converters
Safely measure from mV to kV
Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.
Take on the harshest conditions with the IP-51-rated scope
Rugged and shock-proof, all ScopeMeter® portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants, ensuring reliable accurate performance every time you need them.
Built in multimeter to quickly and conveniently perform precise measurements
Built-in digital multimeter 2 channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include VDC, VAC, VAC + DC, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.
Work a full Shift on a single charge
New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to four hours. And with the easy-access battery door you can make battery swaps fast.
Capture and share waveforms easily with USB connectivity
Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.
See a stable display instantly with connect-and-view™ triggering
Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.
Record up to 48 hours of high-resolution waveforms with ScopeRecord™
ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)
Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faults
Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in this test tool helps find those faults by:
Functions Specifications | |
Bandwidth | 60 MHz |
Number of Channels | 60 MHz: 2 channels |
Real-Time Sample Rate | 625 MS/s |
Inputs | 2 scope plus DMM input |
Independently Floating Isolated Inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
Timebase Range | 10 ns - 2 min/div |
Input Sensitivity | 2 mV - 100 V/div |
Trigger Types | Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
Trigger Source | Any scope input channel, or external via DMM input |
Glitch Capture | 8 ns |
Scope Measurements | Cursor: 7 Automatic: 30 |
Maximum Record Length | ScopeRecord mode: 30,000 pts Scope mode: 10,000 pts per input |
Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
Waveform Compare | Waveform reference with automatic Pass/Fail testing |
DMM Specifications | |
Meter Inputs (Also used as External Trigger Input for the Oscilloscope Mode) | 0.16" (4 mm) banana inputs, fully isolated from scope inputs and from scope ground |
Maximum Resolution | 5000 counts |
Measurements | VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter) |
Memory | 2 Channel Screen + Setup: 30 Recording: 10 |
Display | 6.02" (153 mm) full color LCD with fast update rate |
Environmental Specifications | |
Operating Temperature | 32 to 104°F (0 to 40°C), including batteries 32 to 122°F (0 to 50°C), excluding batteries |
Storage Temperature | -4 to 140°F (-20 to 60°C) |
Operating Altitude | Up to 6666' (2000 m) for CAT IV 600 V, CAT III 1000 V Up to 10,000' (3000 m) for CAT III 600 V, CAT II 1000 V |
Mechanical and General Specifications | |
Li-Ion Battery | BP290 2400 mAh Li-ion battery up to 4 hours included standard |
Dimensions | 10.6 x 7.5 x 2.75" (270 x 190 x 70 mm) |
Weight | 4.85 lbs (2.2 kg) |
Safety Specifications | |
Electrical Safety | 1,000 V CAT III/600 V CAT IV (EN61010-1) |
Click on a category to view a selection of compatible accessories with the Fluke 190-062/AM ScopeMeter Oscilloscope, 2 Channel, 60 MHz.
Functions Specifications | |
Bandwidth | 60 MHz |
Number of Channels | 60 MHz: 2 channels |
Real-Time Sample Rate | 625 MS/s |
Inputs | 2 scope plus DMM input |
Independently Floating Isolated Inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
Timebase Range | 10 ns - 2 min/div |
Input Sensitivity | 2 mV - 100 V/div |
Trigger Types | Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
Trigger Source | Any scope input channel, or external via DMM input |
Glitch Capture | 8 ns |
Scope Measurements | Cursor: 7 Automatic: 30 |
Maximum Record Length | ScopeRecord mode: 30,000 pts Scope mode: 10,000 pts per input |
Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
Waveform Compare | Waveform reference with automatic Pass/Fail testing |
DMM Specifications | |
Meter Inputs (Also used as External Trigger Input for the Oscilloscope Mode) | 0.16" (4 mm) banana inputs, fully isolated from scope inputs and from scope ground |
Maximum Resolution | 5000 counts |
Measurements | VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter) |
Memory | 2 Channel Screen + Setup: 30 Recording: 10 |
Display | 6.02" (153 mm) full color LCD with fast update rate |
Environmental Specifications | |
Operating Temperature | 32 to 104°F (0 to 40°C), including batteries 32 to 122°F (0 to 50°C), excluding batteries |
Storage Temperature | -4 to 140°F (-20 to 60°C) |
Operating Altitude | Up to 6666' (2000 m) for CAT IV 600 V, CAT III 1000 V Up to 10,000' (3000 m) for CAT III 600 V, CAT II 1000 V |
Mechanical and General Specifications | |
Li-Ion Battery | BP290 2400 mAh Li-ion battery up to 4 hours included standard |
Dimensions | 10.6 x 7.5 x 2.75" (270 x 190 x 70 mm) |
Weight | 4.85 lbs (2.2 kg) |
Safety Specifications | |
Electrical Safety | 1,000 V CAT III/600 V CAT IV (EN61010-1) |
Click on a category to view a selection of compatible accessories with the Fluke 190-062/AM ScopeMeter Oscilloscope, 2 Channel, 60 MHz.