High performance handheld scopes built tough. 2.5 GS/s sampling rate, 200MHz bandwidth with 2 input channels and DMM for industrial process control, automation or electronic applications.
High performance handheld scopes built tough. 2.5 GS/s sampling rate, 200MHz bandwidth with 2 input channels and DMM for industrial process control, automation or electronic applications.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
Simplify electrical signal analysis and diagnose equipment failures in the field with the Fluke 190-202. The portable oscilloscope offers the same performance as a bench scope with feature–rich capabilities to tackle just about any troubleshooting task. Designed for plant maintenance engineers and technicians, the 190 ScopeMeter® Series goes into harsh and dirty industrial conditions to test everything from microelectronics to power electronics applications. The Fluke 190-202 two-channel portable oscilloscope features a CAT III 1000V/CAT IV 600V safety rating and is IP-51 rated to withstand harsh environments. Get unprecedented ease-of-use with Connect-and-View™ triggering to capture and analyze waveforms hands free. With 200MHz bandwidth and real-time sampling rates up to 2.5 GS/sec, you can quickly and easily capture noise and other disturbances to quickly make sense of your signals and eliminate the tedium of troubleshooting.
Features
Applications
Number of Channels | 2 |
Bandwidth | 200MHz |
Rise Time | 1.7ns |
Number of Scope Inputs | 2 Input Channels plus External Trigger |
Input Coupling | AC or DC, with ground level indicator |
Input Sensitivity | 2 mV/div to 100 V/div, plus variable attenuation |
Bandwidth Limitier | User selectable: 20 kHz, 20 MHz or full bandwidth |
Normal/Invert/Variable | On each input channel, switched separately |
Input Voltage | CAT III 1000 V/CAT IV 600 V rated, see General Specifications for further details |
Vertical resolution | 8 Bit |
Click on a category to view a selection of compatible accessories with the Fluke 190-202 ScopeMeter Oscilloscope, 2 Channel, 200 MHz.
Number of Channels | 2 |
Bandwidth | 200MHz |
Rise Time | 1.7ns |
Number of Scope Inputs | 2 Input Channels plus External Trigger |
Input Coupling | AC or DC, with ground level indicator |
Input Sensitivity | 2 mV/div to 100 V/div, plus variable attenuation |
Bandwidth Limitier | User selectable: 20 kHz, 20 MHz or full bandwidth |
Normal/Invert/Variable | On each input channel, switched separately |
Input Voltage | CAT III 1000 V/CAT IV 600 V rated, see General Specifications for further details |
Vertical resolution | 8 Bit |
Click on a category to view a selection of compatible accessories with the Fluke 190-202 ScopeMeter Oscilloscope, 2 Channel, 200 MHz.