Combines rugged portability with the high performance of bench oscilloscopes to take you from troubleshooting microelectronics into power electronic application. Additionally, it features up to 10,000 samples per channel, and it is IP51 rated to withstand dust, drips, humidity, and wide temperature variations.
Combines rugged portability with the high performance of bench oscilloscopes to take you from troubleshooting microelectronics into power electronic application. Additionally, it features up to 10,000 samples per channel, and it is IP51 rated to withstand dust, drips, humidity, and wide temperature variations.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
See more, fix more with this four-channel CAT IV rated scopemeter®
Designed for plant maintenance engineers and technicians, this scopemeter also combines the highest safety ratings and rugged portability. This allows the instrument to perform in harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications.
Tackle just about any troubleshooting task with this instrument, including a multimeter, TrendPlot™, and ScopeRecord™ roll paperless recorder modes and hands-free operation with Connect-and-View™ triggering, and much more.
Features
Built in multimeter to quickly and conveniently perform precise measurements
Built-in digital multimeter 4 channel model with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.
Applications
Bandwidth | 200 MHz |
Number of Channels | 200 MHz: 4 channels |
Real-Time Sample Rate | 2.5 GS/s |
Inputs | 4 scope plus DMM input |
Independently Floating Isolated Inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
Timebase Range | 2 ns to 2 min/div |
Input sensitivity | 2 mV to 100 V/div |
Trigger Types | Connect-and-View™ Free run Single shot Edge Delay Dual Slope Video Video line Selectable pulse width N-Cycle |
Trigger Source | Any scope input channel |
Glitch Capture | 8 ns |
Scope Measurements | Cursor: 7 Automatic: 30 |
Maximum Record Length | ScopeRecord mode: 30,000 pts Scope mode: 10,000 pts per input |
Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
Waveform Compare | Waveform reference with automatic Pass/Fail testing |
Environmental Specifications | |
Operating Temperature | 32 to 104°F (0 to 40°C) Including batteries 32 to 122°F (0 to 50°C) Excluding batteries |
Storage Temperature | -4 to 140°F (-20 to 60°C) |
Operating Altitude | Up to 6666' (2000 m) for CAT IV 600 V, CAT III 1000 V Up to 10,000' (3,000 m) for CAT III 600 V, CAT II 1000 V |
Safety Specifications | |
Electrical Safety | 1000 V CAT III/600V CAT IV (EN61010-1) |
Mechanical and General Specifications | |
Li-Ion Battery | BP291 4800 mAh battery up to 7 hours included standard |
Size | 10.6 x 7.5 x 2.7" (270 x 190 x 70 mm) |
Weight | 4.8 lbs (2.2 kg) |
The new Fluke ScopeMeter 190-104 (100MHz) and 190-204 (200MHz) combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeters go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications.
The new 190 Series II includes all the standard ScopeMeter features including TrendPlot™, Connect-and-View™ triggering, and ScopeRecord™ and much more:
Click on a category to view a selection of compatible accessories with the Fluke 190-204/AM ScopeMeter Test Tool, 200 MHz, 4 channels.
Bandwidth | 200 MHz |
Number of Channels | 200 MHz: 4 channels |
Real-Time Sample Rate | 2.5 GS/s |
Inputs | 4 scope plus DMM input |
Independently Floating Isolated Inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
Timebase Range | 2 ns to 2 min/div |
Input sensitivity | 2 mV to 100 V/div |
Trigger Types | Connect-and-View™ Free run Single shot Edge Delay Dual Slope Video Video line Selectable pulse width N-Cycle |
Trigger Source | Any scope input channel |
Glitch Capture | 8 ns |
Scope Measurements | Cursor: 7 Automatic: 30 |
Maximum Record Length | ScopeRecord mode: 30,000 pts Scope mode: 10,000 pts per input |
Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
Waveform Compare | Waveform reference with automatic Pass/Fail testing |
Environmental Specifications | |
Operating Temperature | 32 to 104°F (0 to 40°C) Including batteries 32 to 122°F (0 to 50°C) Excluding batteries |
Storage Temperature | -4 to 140°F (-20 to 60°C) |
Operating Altitude | Up to 6666' (2000 m) for CAT IV 600 V, CAT III 1000 V Up to 10,000' (3,000 m) for CAT III 600 V, CAT II 1000 V |
Safety Specifications | |
Electrical Safety | 1000 V CAT III/600V CAT IV (EN61010-1) |
Mechanical and General Specifications | |
Li-Ion Battery | BP291 4800 mAh battery up to 7 hours included standard |
Size | 10.6 x 7.5 x 2.7" (270 x 190 x 70 mm) |
Weight | 4.8 lbs (2.2 kg) |
The new Fluke ScopeMeter 190-104 (100MHz) and 190-204 (200MHz) combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeters go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications.
The new 190 Series II includes all the standard ScopeMeter features including TrendPlot™, Connect-and-View™ triggering, and ScopeRecord™ and much more:
Click on a category to view a selection of compatible accessories with the Fluke 190-204/AM ScopeMeter Test Tool, 200 MHz, 4 channels.