Designed for plant maintenance engineers and technicians, the 190 ScopeMeter Series goes into harsh and dirty industrial conditions to test everything from microelectronics to power electronics applications.
Designed for plant maintenance engineers and technicians, the 190 ScopeMeter Series goes into harsh and dirty industrial conditions to test everything from microelectronics to power electronics applications.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
Simplify electrical signal analysis and diagnose equipment failures in the field with the Fluke 190-502/S Kit. The portable oscilloscope offers the same performance as a bench scope with feature–rich capabilities to tackle just about any troubleshooting task. Designed for plant maintenance engineers and technicians, the 190 ScopeMeter® Series goes into harsh and dirty industrial conditions to test everything from microelectronics to power electronics applications.
The Fluke 190-502 two-channel portable oscilloscope features a CAT III 1000V/CAT IV 600V safety rating and is IP-51 rated to withstand harsh environments. Get unprecedented ease-of-use with Connect-and-View™ triggering to capture and analyze waveforms hands free. With 500MHz bandwidth and real-time sampling rates up to 5 GS/sec, you can quickly and easily capture noise and other disturbances to quickly make sense of your signals and eliminate the tedium of troubleshooting.
Features
Applications
Bandwidth | 500 MHz |
Number of Channels | 2 Channels |
Real-time Sample Rate | 5 GS |
Inputs | 4 scope or 2 scope plus DMM input |
Independently floating isolated inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
Input sensitivity | 2 mV-100 V/div |
Trigger types | Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
Trigger Source | Any scope input channel, or external via DMM input on 190-XX2, 2 channel models |
Glitch capture | 8 ns |
Scope measurements | Cursor: 7, Automatic: 30 |
Maximum record length | ScopeRecord mode: 30,000 pts, Scope mode: 10,000 pts per input |
Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
Waveform Compare | Waveform reference with automatic Pass/Fail testing |
Click on a category to view a selection of compatible accessories with the Fluke 190-502/AM/S ScopeMeter Portable Oscilloscope Test Tool Kit, 2 Channel, 500MHz .
Bandwidth | 500 MHz |
Number of Channels | 2 Channels |
Real-time Sample Rate | 5 GS |
Inputs | 4 scope or 2 scope plus DMM input |
Independently floating isolated inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
Input sensitivity | 2 mV-100 V/div |
Trigger types | Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
Trigger Source | Any scope input channel, or external via DMM input on 190-XX2, 2 channel models |
Glitch capture | 8 ns |
Scope measurements | Cursor: 7, Automatic: 30 |
Maximum record length | ScopeRecord mode: 30,000 pts, Scope mode: 10,000 pts per input |
Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
Waveform Compare | Waveform reference with automatic Pass/Fail testing |
Click on a category to view a selection of compatible accessories with the Fluke 190-502/AM/S ScopeMeter Portable Oscilloscope Test Tool Kit, 2 Channel, 500MHz .