Fluke 80i-2010s AC/DC Current Clamp, 2000 A

Model: 80i-2010s | UPC: 095969918770

Be the first to review this product

Fluke 80i-2010s AC/DC Current Clamp, 2000 A-

Downloads: datasheet

More Fluke Products

Ask an Expert

Fluke 80i-2010s AC/DC Current Clamp, 2000 A

Model: 80i-2010s | UPC: 095969918770

Be the first to review this product

An open-jaw, clamp-on current probe with a current range of 2000 A, and an accuracy of 0.8%, that is also safety rated for CAT III 1000 V, CAT IV 600 V environments.

Your Price	$1209.99 USD
Availability	1 to 2 Weeks2 to 3 Weeks
Quantity

Traceable In-House Calibration Certificate for your to your

Yes, I would like to add a Calibration Certificate (Model CERTICM1) for only $105.00 USD

Traceable In-House Calibration Certificate for your to your

Yes, I would like to add a Calibration Certificate (Model CERTICM1) for only $105.00 USD

Fluke 80i-2010s Specifications

Electrical
Current Range	2000 A AC rms, ± 2000 A DC
Output Sensitivity	1 mV/A
Accuracy	±0.8% of reading ±0.2% of range
Bandwidth for Accuracy Specification	DC to 400 Hz
Load Impedance	>1 MΩ and <10 pF
Frequency Response (Small Signal)	DC to 20 kHz (-3 dB)
Temperature Coefficient	0.1 x specified accuracy for each degree C above 28°C or below 18°C
Working Voltage	1000 V AC RMS or DC
General Specifications
Operating Temperature	14 to 122°F (-10 to 50°C)
Storage Temperature	-22 to 140°F (-30 to 60°C), with battery removed
Operating Humidity	≤90% RH (at 50 to 86°F [10 to 30°C]) ≤75% RH (at 86 to 104°F [30 to 40°C]) ≤45% RH (at 104 to 122°F [40 to 50°C])
Altitude	Operating: 6561.68' (2000 m) Storage: 39,370.1' (12,000 m)
Demagnetize Clamp	Open and close the clamp jaws several times with soft click, use of the clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less
Power Supply	2 x AA alkaline batteries, IEC LR6
Battery Life	150 hours (typically)
Low Battery Indicator	Yes
Safety	IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V
Ingress Protection	IEC 60529, IP40
Output to Zero	Auto adjustment with Zero button
Output Cable	60" (1.5 m) shielded coaxial cable with BNC plug
Maximum Conductor Size	2.05" (52 mm)
Maximum Jaw Opening	3.2" (81.5 mm)
Dimensions	4.33 x 10.63 x 1.81" (110 x 270 x 46 mm)
Weight	1.6 lbs (0.71 kg), including battery

Click here for complete specifications on the Fluke 80i-2010s

What's included with the Fluke 80i-2010s

Fluke 80i-2010s AC/DC Current Clamp, 2000 A

datasheet for the Fluke 80i-2010s AC/DC Current Clamp, 2000 A

Click on a category to view a selection of compatible accessories with the Fluke 80i-2010s AC/DC Current Clamp, 2000 A.

Carrying Cases

Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25

Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.

Ask a question about Fluke 80i-2010s AC/DC Current Clamp, 2000 A

Customer Reviews for the Fluke 80i-2010s

Specifications ➕➖

Fluke 80i-2010s Specifications

Electrical
Current Range	2000 A AC rms, ± 2000 A DC
Output Sensitivity	1 mV/A
Accuracy	±0.8% of reading ±0.2% of range
Bandwidth for Accuracy Specification	DC to 400 Hz
Load Impedance	>1 MΩ and <10 pF
Frequency Response (Small Signal)	DC to 20 kHz (-3 dB)
Temperature Coefficient	0.1 x specified accuracy for each degree C above 28°C or below 18°C
Working Voltage	1000 V AC RMS or DC
General Specifications
Operating Temperature	14 to 122°F (-10 to 50°C)
Storage Temperature	-22 to 140°F (-30 to 60°C), with battery removed
Operating Humidity	≤90% RH (at 50 to 86°F [10 to 30°C]) ≤75% RH (at 86 to 104°F [30 to 40°C]) ≤45% RH (at 104 to 122°F [40 to 50°C])
Altitude	Operating: 6561.68' (2000 m) Storage: 39,370.1' (12,000 m)
Demagnetize Clamp	Open and close the clamp jaws several times with soft click, use of the clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less
Power Supply	2 x AA alkaline batteries, IEC LR6
Battery Life	150 hours (typically)
Low Battery Indicator	Yes
Safety	IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V
Ingress Protection	IEC 60529, IP40
Output to Zero	Auto adjustment with Zero button
Output Cable	60" (1.5 m) shielded coaxial cable with BNC plug
Maximum Conductor Size	2.05" (52 mm)
Maximum Jaw Opening	3.2" (81.5 mm)
Dimensions	4.33 x 10.63 x 1.81" (110 x 270 x 46 mm)
Weight	1.6 lbs (0.71 kg), including battery