The kit identifies mechanical issues in a system. The book provides useful information for addressing and preventing problems.
The kit identifies mechanical issues in a system. The book provides useful information for addressing and preventing problems.
The Fluke 810/+TRNG Vibration Tester and Training Program Book Kit is ideal for maintaining mechanical systems. The kit monitors vibrations through the process to determine anomalies and possible degradation. It features variable speed controls to improve accuracy and compatibility with a wider range of mechanical operations.
Features
Diagnostic Specifications | |
Standard Faults | Unbalance, looseness, misalignment and bearing failures |
Analysis For | Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, piston compressors, centrifugal compressors, screw compressors, closed coupled machines, spindles |
Machine Rotational Speed Range | 200 to 12,000 rpm |
Diagnosis Details | Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, cited peaks, spectra |
Electrical Specifications | |
Ranging | Automatic |
A/D Converter | 4 channel, 24 bit |
Usable Frequency Bandwidth | 5 Hz to 20 kHz |
Digital Signal Processing Functions | Automatically configured anti-alias filter, high-pass filter, decimation, overlapping, windowing, FFT, and averaging |
Sampling Rate | 2.56 to 51.2 kHz |
Dynamic Range | 128 dB |
Signal to Noise Ratio | 100 dB |
FFT Resolution | 800 lines |
Spectral Windows | Hanning |
Frequency Units | Hz, orders, cpm |
Amplitude Units | in/sec, mm/sec, VdB |
Non-Volatile Memory | SD micro memory card, 2 GB internal + user accessible slot for additional 2 GB storage |
Environmental | |
Temperature | Operating: 32 to 122°F (0 to 50°C) Storage: -4 to 140°F (-20 to 60°C) |
Operating Humidity | 10 to 95% RH (non-condensing) |
Agency Approvals | CHINA RoHS, CSA, CE, C TICK, WEEE |
Electromagnetic Compatibility | EN 61326-1:2006, EN 61010:1:2001 2nd ed. |
General Specifications | |
Display | ¼ VGA, 320 × 240 Color (5.7" diagonal) TFT LCD with LED backlight |
Input/Output Connections | Triaxial sensor connection: 4 pin M12 connector Single axis sensor connection: BNC connector Tachometer connection: mini DIN 6 pin connector PC connection: mini ‘B' USB (2.0) connector |
Battery | Battery type: lithium-ion, 14.8 V, 2.55 Ah Battery charging time: three hours Battery discharge time: eight hours (under normal conditions) |
AC Adapter | Input voltage: 100 to 240 V AC Input frequency: 50/60 Hz |
Operating System | WinCE 6.0 Core |
Language Support | English, French, German, Italian, Japanese, Portuguese, Simplified Chinese, Spanish |
Dimensions | 7.3 x 2.76 x 10.52" (18.56 x 7 x 26.72 cm) |
Weight | 4.2 lbs (1.9 kg) with battery |
Quickly identify mechanical problems with this vibration tester. This instrument combines a powerful diagnostic engine with a simple step-by-step process to report on specific machine issues and their state of the problem the first time measurements are taken, without any prior measurement history.
For use with the 810 Vibration Tester.
Click on a category to view a selection of compatible accessories with the Fluke 810/+TRNG Vibration Tester and Training Program Book Kit.
Diagnostic Specifications | |
Standard Faults | Unbalance, looseness, misalignment and bearing failures |
Analysis For | Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, piston compressors, centrifugal compressors, screw compressors, closed coupled machines, spindles |
Machine Rotational Speed Range | 200 to 12,000 rpm |
Diagnosis Details | Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, cited peaks, spectra |
Electrical Specifications | |
Ranging | Automatic |
A/D Converter | 4 channel, 24 bit |
Usable Frequency Bandwidth | 5 Hz to 20 kHz |
Digital Signal Processing Functions | Automatically configured anti-alias filter, high-pass filter, decimation, overlapping, windowing, FFT, and averaging |
Sampling Rate | 2.56 to 51.2 kHz |
Dynamic Range | 128 dB |
Signal to Noise Ratio | 100 dB |
FFT Resolution | 800 lines |
Spectral Windows | Hanning |
Frequency Units | Hz, orders, cpm |
Amplitude Units | in/sec, mm/sec, VdB |
Non-Volatile Memory | SD micro memory card, 2 GB internal + user accessible slot for additional 2 GB storage |
Environmental | |
Temperature | Operating: 32 to 122°F (0 to 50°C) Storage: -4 to 140°F (-20 to 60°C) |
Operating Humidity | 10 to 95% RH (non-condensing) |
Agency Approvals | CHINA RoHS, CSA, CE, C TICK, WEEE |
Electromagnetic Compatibility | EN 61326-1:2006, EN 61010:1:2001 2nd ed. |
General Specifications | |
Display | ¼ VGA, 320 × 240 Color (5.7" diagonal) TFT LCD with LED backlight |
Input/Output Connections | Triaxial sensor connection: 4 pin M12 connector Single axis sensor connection: BNC connector Tachometer connection: mini DIN 6 pin connector PC connection: mini ‘B' USB (2.0) connector |
Battery | Battery type: lithium-ion, 14.8 V, 2.55 Ah Battery charging time: three hours Battery discharge time: eight hours (under normal conditions) |
AC Adapter | Input voltage: 100 to 240 V AC Input frequency: 50/60 Hz |
Operating System | WinCE 6.0 Core |
Language Support | English, French, German, Italian, Japanese, Portuguese, Simplified Chinese, Spanish |
Dimensions | 7.3 x 2.76 x 10.52" (18.56 x 7 x 26.72 cm) |
Weight | 4.2 lbs (1.9 kg) with battery |
Quickly identify mechanical problems with this vibration tester. This instrument combines a powerful diagnostic engine with a simple step-by-step process to report on specific machine issues and their state of the problem the first time measurements are taken, without any prior measurement history.
For use with the 810 Vibration Tester.
Click on a category to view a selection of compatible accessories with the Fluke 810/+TRNG Vibration Tester and Training Program Book Kit.