- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Keeping Your World Up & Running®
Keeping Your World Up & Running®
The kit provides optimal support for process calibration. It features the tools necessary to analyze nearly any system.
The kit provides optimal support for process calibration. It features the tools necessary to analyze nearly any system.
Optimize performance, results and calibration processes with this Fluke 9102S/725-KIT Lo-Temp Dry-Well and Process Calibrator Kit. Ideal for use in the field or the laboratory, it will test and calibrate almost any process parameter and comes equipped with the dry block temperature calibrator and the multifunction process calibrator. It features a versatile design which allows it to operate in any workplace without compromising the accuracy of the results.
Features
| Fluke 9100S-A Specifications | |
| Temperature Range | -10 to 122°C (14 to 252°F) at 23°C ambient |
| Accuracy | ±0.25°C |
| Stability | ±0.05°C |
| Well-to-Well Uniformity | ±0.10°C at 35°C, ±0.50°C at 200°C, ±1.00°C at 500°C |
| Well Depth | 4" (102 mm) |
| Stabilization Time | 7 minutes |
| Heating Times | Ambient to 100°C: 10 minutes |
| Cooling Times | Ambient to 0°C: 10 minutes |
| Dimensions | 4 x 6 x 6.9" (100 x 152 x 175 mm) |
| Weight | 4 lbs (1.8 kg) |
| Fluke 725 Specifications | |
| Voltage DC | 30 V: 0.02% + 2 counts (upper display) 30 V: 0.02% + 2 counts (lower display) 100 mV: 0.02% + 2 counts -10to 75 mV: 0.025% + 1 count (via TC connector) |
| Current DC | 24 mA: 0.02% + 2 counts |
| Resistance | 0 to 400 Ω: 0.1 Ω (4-wire), 0.15 Ω (2- and 3-wire) 401 to 1500 Ω: 0.5 Ω (4-wire), 1 Ω (2- and 3-wire) 1500 to 3200 Ω: 1 Ω (4-wire), 1.5 Ω (2- and 3-wire) |
| Frequency | 2 to 1000 CPM: 0.05% + 1 count 1 to 1100 Hz: 0.05% + 1 count 1 to 10 kHz: 0.05% + 1 count Sensitivity: 1 V peak-to-peak-minimum |
| Pressure | Accuracy from 0.025% of range using any of 29 pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure. |
| Ramp Functions | Source functions: voltage, current, resistance, frequency, temperature Ramps: slow ramp, fast ramp, 25% step-ramp |
| Loop Power Function | Voltage: 24 V Accuracy: 10% Maximum current: 22 mA, short circuit protected |
| Step Functions | Source functions: Voltage, current, resistance, frequency, temperature Steps: 25% of range, 100% of range |
| Temperature | Operating: 14 to 131°F (-10 to 55°C) Storage: -4 to 159.8°F (-20 to 71°C) |
| Dimensions | 5.1 x 9.3 x 2.4" (130 x 236 x 61 mm) |
| Weight | 1.43 lbs (0.65 kg) |
Optimize performance with this dry block temperature calibrator that features a temperature range of -10 to 122°C. Complete with a NIST-traceable calibration certificate, it features two wells so you can use one for a reference thermometer to increase its accuracy.
Easily source and measure a wide variety of process parameters and test many process devices. This unit is capable of measuring and sourcing mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Additionally, it features a small and compact design.
Click on a category to view a selection of compatible accessories with the Fluke 9102S/725-KIT Lo-Temp Dry-Well and Process Calibrator Kit.
| Fluke 9100S-A Specifications | |
| Temperature Range | -10 to 122°C (14 to 252°F) at 23°C ambient |
| Accuracy | ±0.25°C |
| Stability | ±0.05°C |
| Well-to-Well Uniformity | ±0.10°C at 35°C, ±0.50°C at 200°C, ±1.00°C at 500°C |
| Well Depth | 4" (102 mm) |
| Stabilization Time | 7 minutes |
| Heating Times | Ambient to 100°C: 10 minutes |
| Cooling Times | Ambient to 0°C: 10 minutes |
| Dimensions | 4 x 6 x 6.9" (100 x 152 x 175 mm) |
| Weight | 4 lbs (1.8 kg) |
| Fluke 725 Specifications | |
| Voltage DC | 30 V: 0.02% + 2 counts (upper display) 30 V: 0.02% + 2 counts (lower display) 100 mV: 0.02% + 2 counts -10to 75 mV: 0.025% + 1 count (via TC connector) |
| Current DC | 24 mA: 0.02% + 2 counts |
| Resistance | 0 to 400 Ω: 0.1 Ω (4-wire), 0.15 Ω (2- and 3-wire) 401 to 1500 Ω: 0.5 Ω (4-wire), 1 Ω (2- and 3-wire) 1500 to 3200 Ω: 1 Ω (4-wire), 1.5 Ω (2- and 3-wire) |
| Frequency | 2 to 1000 CPM: 0.05% + 1 count 1 to 1100 Hz: 0.05% + 1 count 1 to 10 kHz: 0.05% + 1 count Sensitivity: 1 V peak-to-peak-minimum |
| Pressure | Accuracy from 0.025% of range using any of 29 pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure. |
| Ramp Functions | Source functions: voltage, current, resistance, frequency, temperature Ramps: slow ramp, fast ramp, 25% step-ramp |
| Loop Power Function | Voltage: 24 V Accuracy: 10% Maximum current: 22 mA, short circuit protected |
| Step Functions | Source functions: Voltage, current, resistance, frequency, temperature Steps: 25% of range, 100% of range |
| Temperature | Operating: 14 to 131°F (-10 to 55°C) Storage: -4 to 159.8°F (-20 to 71°C) |
| Dimensions | 5.1 x 9.3 x 2.4" (130 x 236 x 61 mm) |
| Weight | 1.43 lbs (0.65 kg) |
Optimize performance with this dry block temperature calibrator that features a temperature range of -10 to 122°C. Complete with a NIST-traceable calibration certificate, it features two wells so you can use one for a reference thermometer to increase its accuracy.
Easily source and measure a wide variety of process parameters and test many process devices. This unit is capable of measuring and sourcing mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Additionally, it features a small and compact design.
Click on a category to view a selection of compatible accessories with the Fluke 9102S/725-KIT Lo-Temp Dry-Well and Process Calibrator Kit.
