Highly reliable, measures 1 to 1000 A, and provides accurate current reading without breaking the circuit. This clamp measures both AC and DC with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas.
Highly reliable, measures 1 to 1000 A, and provides accurate current reading without breaking the circuit. This clamp measures both AC and DC with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas.
Features
Measurement Type | Hall sensor |
Nominal Current Range | 600 A, AC, 1000 A, DC |
Continuous Current Range | 1 to 600 A, AC, 1 to 1000 A, DC |
Maximum Non-Destructive Current | 1000 A |
Lowest Measurable Current | 0.5 A |
Basic Accuracy | 2% + 0.5 A (% reading + floor spec) |
Useable Frequency | DC - 10 kHz |
Output Level(s) | 1 mV/A |
Zero Error Adjustment | Yes |
Safety | CAT III, 600 V |
Maximum Voltage | 600 V |
Battery Life | 9 V, 60 h |
Output Cable Length | 5.25' (1.6 m) |
Click on a category to view a selection of compatible accessories with the Fluke i1010 AC/DC Current Clamp.
Measurement Type | Hall sensor |
Nominal Current Range | 600 A, AC, 1000 A, DC |
Continuous Current Range | 1 to 600 A, AC, 1 to 1000 A, DC |
Maximum Non-Destructive Current | 1000 A |
Lowest Measurable Current | 0.5 A |
Basic Accuracy | 2% + 0.5 A (% reading + floor spec) |
Useable Frequency | DC - 10 kHz |
Output Level(s) | 1 mV/A |
Zero Error Adjustment | Yes |
Safety | CAT III, 600 V |
Maximum Voltage | 600 V |
Battery Life | 9 V, 60 h |
Output Cable Length | 5.25' (1.6 m) |
Click on a category to view a selection of compatible accessories with the Fluke i1010 AC/DC Current Clamp.