- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Expertly manage operational networks with the industrial ethernet cable and network tester that troubleshoots ethernet failures and optimizes infrastructure. By verifying cable performance up to 10 Gb/s, the unit solves network connectivity problems and keeps production lines running smoothly and efficiently.
Expertly manage operational networks with the industrial ethernet cable and network tester that troubleshoots ethernet failures and optimizes infrastructure. By verifying cable performance up to 10 Gb/s, the unit solves network connectivity problems and keeps production lines running smoothly and efficiently.
Using frequency-based measurements, the cable and network tester provides distance to fault information along with a wire map of the cable under test. By performing nearest switch diagnostics to identify key network issues and validate switch configuration, the tester helps to optimize the network and manage results via the included LinkWare software.
Features
Cable testing you trust
The LinkIQ™ is capable of measuring lengths up to 1000' (305 m) and provides distance to faults such as opens, shorts, and unterminated cable. Using the industrial ethernet remote adapter allows for a complete wire map of the cable pairs which helps identify miswired and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LinkIQ™ supports EtherNet/IP, PROFINET, EtherCAT and other industrial ethernet protocols and qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s). It qualifies the cabling bandwidth by taking multiple frequency-based measurements. Using IEEE-standards based measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link.
Network testing you need
Along with the robust cable testing features, the LinkIQ also provides detailed information on the nearest connected switch. The LinkIQ negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name, port number, and VLAN info.
In-depth PoE testing
While Power over Ethernet makes installation of devices such as security cameras and access points simpler, a survey by the Ethernet Alliance of over 800 installers, integrators and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that the IEEE offers three PoE standards, the term "PoE" is not registered and there are a variety of non-standards-compliant implementations as well. To simplify PoE installation and troubleshooting, the LinkIQ displays the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Further, the LinkIQ will actually place a load on the connection to ensure that the advertised power is actually being delivered by the switch across the cabling infrastructure.
Applications
| Active Network Diagnostics | |
| Diagnostic Protocols | Link layer discovery protocol (LLDP) Cisco discovery protocol (CDP) Fast link pulses (FLP) |
| Nearest Device Diagnostics (If available through Diagnostic Protocols) | Switch name Port number VLAN ame Advertised data rates Advertised duplex |
| Power Over Ethernet Compatibility | IEEE 802.3af/at (SW v1.0) Hardware negotiation with signature resistance Software negotiation with LLDP/CDP |
| Power Over Ethernet Diagnostics | Advertised power class (1 to 4), SW v1.0 Advertised available power Powered pairs Diagnostics for both single and dual signatures |
| Power Over Ethernet Measurements | Loaded voltage (V), Loaded power (W) |
| Port Blink | Blink the light of the connected port |
| Cable Test Specifications | |
| Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
| Commissioning Autotests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map only Test Speed: 6 seconds for lengths <229' (70 m) |
| Cable Types | Balanced twisted-pair cabling Unshielded twisted-pair Screened twisted-pair 2-pair and/or 4-pair |
| Wire Map-Only Tests | Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings (straight through, half-crossover, full-crossover) Test speed: 1 second for lengths <393' (120 m) |
| Length (Maximum) | 1000' (305 m) |
| Nominal Velocity of Propagation (NVP) | User settable |
| Tone Generator | Generates digital tones compatible with Fluke Networks IntelliTone probe Generates analog tones compatible with general analog probes |
| Remote ID Locators | Use remote ID terminations to identify up to 7 unique ports or office outlets |
| General Specifications | |
| Display | 800 x 480 color capacitive multi-touch |
| Temperature | Operating: 32 to 113°F (0 to 45°C) Storage: -4 to 122°F (-20 to 50°C) |
| Operating Relative Humidity | 0 to 90%, 32 to 95°F (0 to 35°C) 0 to 70%, 95 to 113°F (35 to 45°C) |
| Operating Altitude | 13,123' (4000 m) 10,498' (3200 m) with AC adapter |
| Vibration | Random, 2 g, 5 to 500 Hz |
| Drop | 39" (1 m) drop, 6 sides |
| Battery | Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 32 to 104°F (0 to 40°C) |
| Power Adapter | Input: 100 to 240 V AC ±10%, 50/60 Hz Output: 15 V DC, 2 A maximum Class II |
| Host Interface | USB type C |
| Dimensions | 8.5 x 4.5" (21.59 x 11.43 cm) |
| Weight | 1.6 lbs (624 g) |
Click on a category to view a selection of compatible accessories with the Fluke Networks LIQ-100-IE Industrial Ethernet Cable and Network Tester.
| Active Network Diagnostics | |
| Diagnostic Protocols | Link layer discovery protocol (LLDP) Cisco discovery protocol (CDP) Fast link pulses (FLP) |
| Nearest Device Diagnostics (If available through Diagnostic Protocols) | Switch name Port number VLAN ame Advertised data rates Advertised duplex |
| Power Over Ethernet Compatibility | IEEE 802.3af/at (SW v1.0) Hardware negotiation with signature resistance Software negotiation with LLDP/CDP |
| Power Over Ethernet Diagnostics | Advertised power class (1 to 4), SW v1.0 Advertised available power Powered pairs Diagnostics for both single and dual signatures |
| Power Over Ethernet Measurements | Loaded voltage (V), Loaded power (W) |
| Port Blink | Blink the light of the connected port |
| Cable Test Specifications | |
| Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
| Commissioning Autotests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map only Test Speed: 6 seconds for lengths <229' (70 m) |
| Cable Types | Balanced twisted-pair cabling Unshielded twisted-pair Screened twisted-pair 2-pair and/or 4-pair |
| Wire Map-Only Tests | Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings (straight through, half-crossover, full-crossover) Test speed: 1 second for lengths <393' (120 m) |
| Length (Maximum) | 1000' (305 m) |
| Nominal Velocity of Propagation (NVP) | User settable |
| Tone Generator | Generates digital tones compatible with Fluke Networks IntelliTone probe Generates analog tones compatible with general analog probes |
| Remote ID Locators | Use remote ID terminations to identify up to 7 unique ports or office outlets |
| General Specifications | |
| Display | 800 x 480 color capacitive multi-touch |
| Temperature | Operating: 32 to 113°F (0 to 45°C) Storage: -4 to 122°F (-20 to 50°C) |
| Operating Relative Humidity | 0 to 90%, 32 to 95°F (0 to 35°C) 0 to 70%, 95 to 113°F (35 to 45°C) |
| Operating Altitude | 13,123' (4000 m) 10,498' (3200 m) with AC adapter |
| Vibration | Random, 2 g, 5 to 500 Hz |
| Drop | 39" (1 m) drop, 6 sides |
| Battery | Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 32 to 104°F (0 to 40°C) |
| Power Adapter | Input: 100 to 240 V AC ±10%, 50/60 Hz Output: 15 V DC, 2 A maximum Class II |
| Host Interface | USB type C |
| Dimensions | 8.5 x 4.5" (21.59 x 11.43 cm) |
| Weight | 1.6 lbs (624 g) |
Click on a category to view a selection of compatible accessories with the Fluke Networks LIQ-100-IE Industrial Ethernet Cable and Network Tester.
