Verify ethernet cable performance up to 10 Gb/s with this industrial ethernet cable and network test kit to solve network connectivity problems. In addition, this kit includes a remote ID, four patch cords, an AC charger, a universal coupler, a modular adapter, a probe, a USB-C to USB-A cable, a hanging strap, and a carrying case.
Verify ethernet cable performance up to 10 Gb/s with this industrial ethernet cable and network test kit to solve network connectivity problems. In addition, this kit includes a remote ID, four patch cords, an AC charger, a universal coupler, a modular adapter, a probe, a USB-C to USB-A cable, a hanging strap, and a carrying case.
Provide complete documentation with this cable and network tester advanced kit capable of exporting report data to a PC to manage results and print reports. Additionally, this kit can identify switch information such as switch data rate, switch name, IP address, port number, and VLAN.
Features
Applications
Diagnostic Protocols | Link Layer Discovery Protocol (LLDP) Cisco Discovery Protocol (CDP) Fast Link Pulses (FLP) |
Nearest Device Diagnostics, (If Available Through Diagnostic Protocols) | Switch name Port number VLAN name Advertised data rates Advertised duplex |
Power Over Ethernet Compatibility | IEEE 802.3af/at (SW v1.0) Hardware negotiation with signature resistance Software negotiation with LLDP/CDP |
Power Over Ethernet Diagnostics | Advertised power class (1 to 4) (SW v1.0) Advertised available power Powered pairs Diagnostics for both single and dual signatures |
Power Over Ethernet Measurements | Loaded voltage (V) Loaded power (W) |
Port Blink | Blink the light of the connected port |
Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
Commissioning Autotests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only Test Speed: 6 seconds for lengths <229.65' (70 m) |
Cable Types | Balanced twisted-pair cabling Unshielded twisted-pair Screened twisted-pair 2-pair and/or 4-pair |
Wire Map-Only Tests | Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings (straight through, halfcrossover, full-crossover) Test speed: 1 second for lengths <393.7' (120 m) |
Length (Maximum) | 1000' (305 m) |
Nominal Velocity of Propagation (NVP) | User settable |
Tone Generator | Generates digital tones compatible with Fluke Networks IntelliTone probe Generates analog tones compatible with general analog probes. |
Remote ID Locators | Use remote ID terminations to identify up to 7 unique ports or office outlets |
Drop | 3.28' (1 m) drop, 6 sides |
Vibration | Random, 2 g, 5 to 500 Hz |
Operating Altitude | 13,123.36' (4000 m) 10,498.69' (3200 m) with AC adapter |
Operating Relative Humidity | 0 to 90%, 32 to 95°F (0 to 35°C) 0 to 70%, 95 to 113°F (35 to 45°C) |
Temperature | Operating: 32 to 113°F (0 to 45°C) Storage: -4 to 1122°F (-20 to 50°C) |
Display | 800 x 480 color capacitive multi-touch |
Host Interface | USB type C |
Power Adapter | Input: 100 to 240 V AC ±10%, 50/60 Hz Output: 15 V DC, 2 A maximum; Class II |
Battery | Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 32 to 104°F (0 to 40°C) |
Dimensions | 8.5 x 4.5" (21.59 x 11.43 cm) |
Weight | 1 lbs, 6 oz (624 g) |
Click on a category to view a selection of compatible accessories with the Fluke Networks LinkIQ Industrial Ethernet Cable and Network Test Kit, 10 Gb/s, 1000'.
Diagnostic Protocols | Link Layer Discovery Protocol (LLDP) Cisco Discovery Protocol (CDP) Fast Link Pulses (FLP) |
Nearest Device Diagnostics, (If Available Through Diagnostic Protocols) | Switch name Port number VLAN name Advertised data rates Advertised duplex |
Power Over Ethernet Compatibility | IEEE 802.3af/at (SW v1.0) Hardware negotiation with signature resistance Software negotiation with LLDP/CDP |
Power Over Ethernet Diagnostics | Advertised power class (1 to 4) (SW v1.0) Advertised available power Powered pairs Diagnostics for both single and dual signatures |
Power Over Ethernet Measurements | Loaded voltage (V) Loaded power (W) |
Port Blink | Blink the light of the connected port |
Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
Commissioning Autotests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only Test Speed: 6 seconds for lengths <229.65' (70 m) |
Cable Types | Balanced twisted-pair cabling Unshielded twisted-pair Screened twisted-pair 2-pair and/or 4-pair |
Wire Map-Only Tests | Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings (straight through, halfcrossover, full-crossover) Test speed: 1 second for lengths <393.7' (120 m) |
Length (Maximum) | 1000' (305 m) |
Nominal Velocity of Propagation (NVP) | User settable |
Tone Generator | Generates digital tones compatible with Fluke Networks IntelliTone probe Generates analog tones compatible with general analog probes. |
Remote ID Locators | Use remote ID terminations to identify up to 7 unique ports or office outlets |
Drop | 3.28' (1 m) drop, 6 sides |
Vibration | Random, 2 g, 5 to 500 Hz |
Operating Altitude | 13,123.36' (4000 m) 10,498.69' (3200 m) with AC adapter |
Operating Relative Humidity | 0 to 90%, 32 to 95°F (0 to 35°C) 0 to 70%, 95 to 113°F (35 to 45°C) |
Temperature | Operating: 32 to 113°F (0 to 45°C) Storage: -4 to 1122°F (-20 to 50°C) |
Display | 800 x 480 color capacitive multi-touch |
Host Interface | USB type C |
Power Adapter | Input: 100 to 240 V AC ±10%, 50/60 Hz Output: 15 V DC, 2 A maximum; Class II |
Battery | Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 32 to 104°F (0 to 40°C) |
Dimensions | 8.5 x 4.5" (21.59 x 11.43 cm) |
Weight | 1 lbs, 6 oz (624 g) |
Click on a category to view a selection of compatible accessories with the Fluke Networks LinkIQ Industrial Ethernet Cable and Network Test Kit, 10 Gb/s, 1000'.