A single range 200 A clamp-on AC current clamp with current output via safety shrouded banana plugs. It is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
A single range 200 A clamp-on AC current clamp with current output via safety shrouded banana plugs. It is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
Features
Nominal Current Range | 200 A |
Continuous Current Range | 0.5 to 200 A |
Maximum Non-Destructive | 240 A |
Lowest Measurable Current | 0.5 A |
Basic Accuracy | 1.5% + 0.5 A (48 to 65 Hz) (% reading + floor spec) |
Useable Frequency | 40 Hz to 10 kHz |
Output Level(s) | 1 mA/A |
Safety | CAT III, 600 V |
Maximum Voltage | 600 V AC |
Maximum Conductor Diameter | 0.8" (20 mm) |
Maximum Conductor Size (busbar) | 0.8 x 0.2" (20 x 5 mm) |
Output Cable Length | 4.9' (1.5 m) |
Click on a category to view a selection of compatible accessories with the Fluke i200 AC Current Clamp.
Nominal Current Range | 200 A |
Continuous Current Range | 0.5 to 200 A |
Maximum Non-Destructive | 240 A |
Lowest Measurable Current | 0.5 A |
Basic Accuracy | 1.5% + 0.5 A (48 to 65 Hz) (% reading + floor spec) |
Useable Frequency | 40 Hz to 10 kHz |
Output Level(s) | 1 mA/A |
Safety | CAT III, 600 V |
Maximum Voltage | 600 V AC |
Maximum Conductor Diameter | 0.8" (20 mm) |
Maximum Conductor Size (busbar) | 0.8 x 0.2" (20 x 5 mm) |
Output Cable Length | 4.9' (1.5 m) |
Click on a category to view a selection of compatible accessories with the Fluke i200 AC Current Clamp.