Fluke I310S Offers
The Fluke i310s Current Probe is based on Hall Effect technology for use in measurement of both DC and AC current.
The Fluke i310s Current Probe may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.
Using advanced Hall Effect technology, the Clamp can accurately measure currents up to 450 A peak over the frequency range of dc to 20 kHz. These features make it a powerful tool for use in inverters, switch mode power supplies, industrial controllers, automotive diagnostics, and other applications requiring current measurements and/or waveform analysis.
- Current Ranges: 30 A and 300 A ACrms or ±45 A and 450 A DC
- Measuring Ranges: ±45 A and 450 A
- Output Sensitivity: 10 mV/A (40 A) to 1 mV/A (400 A)
- Resolution: ±50 mA (40 A) to ±100 mA (400 A)
- Load Impedance: > 10 k Ohms and 100 pF
- Frequency Range (small signal): DC to 20 kHz (- 3 dB)
- Phase Shift below 1 kHz, < 2 degrees
- Temperature Coefficient: ±0.1% of reading / ±C
- Power Supply: 9 V Alkaline
Fluke I310S Specifications
| Electrical Characteristics |
| Current Ranges |
|
30 A and 300 A ACRMS or ±45 A and 450 A DC |
|
| ACRMS or DC | |
| Inrush Current | |
| Output Sensitivity |
|
10 mV/A (30 A) |
|
1 mV/A (300 A) |
|
| Accuracy (at +25°C) |
| (30A range) |
±1% of reading ±50 mA |
| (300A range) |
±1% of reading ±300 mA |
|
| Bandwidth to meet accuracy specification | |
| Phase Shift below 1 kHz | |
| Resolution |
|
±50 mA (30 A) |
|
±100 mA (300 A) |
|
| Load Impedance | |
| Conductor Position Sensitivity |
|
±1.5% relative to centre reading |
|
| Frequency Range |
| (small signal) |
DC to 20 kHz (- 3 dB) |
|
| Temperature Coefficient | |
| Power Supply | |
| Battery Life |
|
30 Hours, low battery indicator |
|
| Working Voltage (see Safety Standards section) | |
| General Characteristics |
| Maximum Conductor Size | |
| Output Connection |
|
Safety BNC connector |
|
Supplied with safety 4mm adaptor |
|
| Output Zero |
|
Manual adjust via thumbwheel |
|
| Cable Length | |
| Operating Temperature Range | |
| Storage Temperature Range (with battery removed) | |
| Operating Humidity |
|
15% to 85% (non-condensing) |
|
| Weight | |
| Safety Standards |
| BS EN 61010-1 | |
| BS EN 61010-2-032 | |
| BS EN 61010-031 | |
| 300 VRMS, Category III, Pollution Degree 2 | |
| Note |
|
Use of the probe on un-insulated conductors is limited to 300 V ACRMS or DC and frequencies below 1 kHz.
|
|
| EMC Standards |
| BS EN 61236 |
1998 +A1, A2, & A3 | |
Click here for complete specifications on the Fluke I310S
What's included with the Fluke I310S
- Fluke i310s Current Probe
Click on a category to view a selection of compatible accessories with the Fluke i310s Current Probe.
Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.
Ask a question about Fluke i310s Current Probe
Customer Reviews for the Fluke I310S
