This complete options package contains these funtions:
FollowMe™ force-based positioning - Position the crosshead by manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning
Travel indication - Position is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated
Computer control - Fully control the stand and force gauge / indicator via custom-written application in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software
Programmable travel limits - The stand stops at or cycles between programmable upper and lower travel distances
Overload protection - Protects a force gauge or force sensor against overload. Also compatible with many competitors' gauges
Auto return - The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit
Cycling / dwell time - Same as auto-return, but programmable up to 99,999 cycles. Programmable dwell time at upper and lower limits up to 9,999 seconds
Independent Up and Down speeds - Individually specify speeds for the up and down directions
Low speed extension - Extends the standard speed range down to 0.001 in/min (0.02 mm/min)
High speed extension - Extends max speed to 90 in/min (2,300 mm/min)
Break detection - Crosshead stops at a programmable drop in force
Loadholding - Dynamically adjusts the crosshead position to maintain a specified load for an indefinite or specified period of time
Preload / sample touch - Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, spring, elongation, and other applications
Profiles - Save and recall sets of test parameters, such as speeds, travel limits, preload, etc. Maximum of 50 profiles may be stored
Note: Requires a Series 5 or 7 gauge or indicator.
What's included with the Mark-10 SFCOMP
Mark-10 SFCOMP Complete Options Package for ESM1500
Ask a question about Mark-10 SFCOMP Complete Options Package for ESM1500
This complete options package contains these funtions:
FollowMe™ force-based positioning - Position the crosshead by manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning
Travel indication - Position is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated
Computer control - Fully control the stand and force gauge / indicator via custom-written application in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software
Programmable travel limits - The stand stops at or cycles between programmable upper and lower travel distances
Overload protection - Protects a force gauge or force sensor against overload. Also compatible with many competitors' gauges
Auto return - The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit
Cycling / dwell time - Same as auto-return, but programmable up to 99,999 cycles. Programmable dwell time at upper and lower limits up to 9,999 seconds
Independent Up and Down speeds - Individually specify speeds for the up and down directions
Low speed extension - Extends the standard speed range down to 0.001 in/min (0.02 mm/min)
High speed extension - Extends max speed to 90 in/min (2,300 mm/min)
Break detection - Crosshead stops at a programmable drop in force
Loadholding - Dynamically adjusts the crosshead position to maintain a specified load for an indefinite or specified period of time
Preload / sample touch - Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, spring, elongation, and other applications
Profiles - Save and recall sets of test parameters, such as speeds, travel limits, preload, etc. Maximum of 50 profiles may be stored
Note: Requires a Series 5 or 7 gauge or indicator.
Our website gives you access to the best pricing we can offer. We encourage you to use our Build a Quote tool to build yourself a quote with the item(s) you’re interested in.
Your quote will then be emailed to you with all of the information you require. This also locks in your pricing for 30 days!
Check your Order Status
Check the status of your online order by entering your information below. Verify your order information is correct and the email address is what was used when you placed your order.
Ask our experts
To ask our Mark-10 experts a question please include your contact details. * Required Fields
Email Me When Available
Receive updates on when this product will be available for ordering.
*We don’t share your email. You can unsubscribe at any time.
Be the first to know!
Be the first to know when we have news, discounts, special offers and promotions.
*We don’t share your email. You can unsubscribe at any time.
Be the first to receive updates!
The Energy Monitoring System You've Been Waiting For!
Launching 2022
*We don’t share your email. You can unsubscribe at any time.
Exclusive Member Store
Don’t have a Member Account? Our Member Store gives you access to the following advantages:
Exclusive Member Pricing*
Exclusive Special Offers
Free Shipping on Online Orders over $99
Express Checkouts
Access to an additional 200 000+ Products via our Extended Search tool
Multiple Shipping Addresses
Additional Shipping Options
*Where applicable. Some of our pricing is already discounted.