RIGOL DSG5126 Offers

Widely used in R&D, production, maintenance, education, and training scenarios, this oscilloscope offers high channel-to-channel phase stability to meet the demand for applications of multi-channel coherent signals. Additionally, it is equipped with an Android-based system and can be controlled by the touch screen, the externally connected mouse, Web Control, and SCPI command.

Features

• Multi-channel with six channels, and supports multi-device rack mount
• Channel-to-channel phase stability <1° at 10 GHz, resolution of phase offset setting adjustable in 0.01° steps
• Fast switching speed of 3 ms
• Output maximum available power up to 25 dBm
• Low phase noise below -133 dBc/Hz at 1 GHz, 10 kHz offset
• Modulation type: AM, FM, PM, and Pulse
• Communication interface: USB and LAN
• Structure dimensions: 2U height, full-rack width

High-performance

• Excellent channel-to-channel phase stability, low phase noise, and high power output
• AM, FM, and PM
• Frequency sweep, level sweep, and frequency and level sweep; list sweep mode enables users to generate the user-defined sweep list

Compact design

Supports six channels with each channel independent of each other and independently controlled. Multiple devices can be integrated in a rack mount installation, saving space and time.

High expansion

• With a standard 2U rack size and rack mount kit, you can extend the channels of this signal generator
• The front and rear panel ventilation design povides adequate ventilation to ensure the signal accuracy and stability even if multiple devices are stacked in the cabinet
• Equipped with a standard configuration of the PC software to realize integrated control of multiple instruments
• With the PC software, you can operate this instrument in remote control and make a global parameter configuration for multiple channels to meet the integrated test application scenarios

User-friendly operation

This microwave signal generator is equipped with a touchscreen, and allows you to connect an external display to operate it. You can also use the web control software to realize remote control of this instrument or use the SCPI commands to control it

• Self-equipped touchscreen: Enables you to operate and control this instrument with touch-enabled gestures. It does not have any physical keys on the front panel to operate except the power key
• Externally connected display: Allows you to externally connect displays (e.g. PAD, monitor, and projector) via an HDMI interface to enjoy user-friendly operation and viewing experience with a greater choice of display devices
• Web control remote operation: You only need to input the IP address of this unit into the address bar of the web browser to open the web control software. The display of the current user interface shown in the web control page is consistent with the unit. You can use the mouse to clock the menus in the web control interface to operate this instrument in remotely. In the web control interface, you can click to view the basic information of this unit, and you can also set or modify the network status
• Control with the SCPI command set: Supports the standard SCPI command set. You can send the SCPI commands via the USB or LAN interface to realize remote control of this unit. Moreover, you can use the Excel, LabVIEW, Visual Basic, Visual C++, and other relevant programming tools to send commands in batches automatically, to meet the demands of automation test scenarios

Applications

• Research and development
• Production
• Maintenance
• Education
• Training
• Superconducting quantum computation
• MIMO
• Radar signal generation
• EMS