The current peak probe can be directly connected to a BNC input connector of a waveform measuring instrument, and by clamping on a conductor to be measured, allows the current waveform to be easily captured. This probe must be used with the RIGOL RP1000P Current Probe Power Supply.
The current peak probe can be directly connected to a BNC input connector of a waveform measuring instrument, and by clamping on a conductor to be measured, allows the current waveform to be easily captured. This probe must be used with the RIGOL RP1000P Current Probe Power Supply.
Features
Current Sensor Dimension | approx. 175mmx18mmx32mm |
Terminator Dimension | approx. 6.9mmx2.5mmx1.6mm |
Maximum Dimensions of Conductor to be Measured | approx. 5mm |
Current Sensor Cable Length | approx. 150cm |
Power Supply Cable Length | approx. 100cm |
Weight | approx. 240g |
Working Temperature | 0° to +40°, 0 to 80%RH |
Location for Use | Indoor, altitude up to 2000m |
Measurement Category | CAT I (anticipated transient voltage 1500V) |
Current Sensor Dimension | approx. 175mmx18mmx32mm |
Terminator Dimension | approx. 6.9mmx2.5mmx1.6mm |
Maximum Dimensions of Conductor to be Measured | approx. 5mm |
Current Sensor Cable Length | approx. 150cm |
Power Supply Cable Length | approx. 100cm |
Weight | approx. 240g |
Working Temperature | 0° to +40°, 0 to 80%RH |
Location for Use | Indoor, altitude up to 2000m |
Measurement Category | CAT I (anticipated transient voltage 1500V) |