- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Small and versatile, this four-gaspersonal gas detector can be comfortably clipped within a worker's breathing zone and comes with microsensors that monitor and display LEL combustibles, O2, CO (hydrogen compensated CO also available), and H2S. Additionally, it has a lithium-ion battery.
Small and versatile, this four-gaspersonal gas detector can be comfortably clipped within a worker's breathing zone and comes with microsensors that monitor and display LEL combustibles, O2, CO (hydrogen compensated CO also available), and H2S. Additionally, it has a lithium-ion battery.
Representing the latest evolution of gas detection technology utilizing a new generation of micro sensors, this gas monitor has an LEL sensor that has a unique design with two active filaments in one sensor to increase it’s resistance to silicone poisoning. If one filament gets poisoned the second filament takes over. In addition, the new O2 sensor is electrochemical with a three to five-year life span. In addition, this detector is small enough for a worker to practically wear in the breathing zone.
Features
Applications
| Gas Detected | (CO) H2 compensated, carbon monoxide (CO), Hydrogen Sulfide (H2S), H2S only, combustible gases (methane as standard), oxygen |
| Types of Alarms | Gas Alarm: 3 Increasing alarms, STEL, TWA, overscale alarm. O2 decreasing/increasing. Trouble alarm: Sensor disconnection, low battery, circuit error, calibration range error |
| Operating Temperature and Humidity | Continuous environment: -4 to 122°F (-20 to 50°C), 10 to 90% RH, non-condensing Temporary environment, 15 minutes: -40 to 140°F (-40 to 60°C), 0 to 95% RH, non-condensing |
| Response Time | Within 30 seconds (T90) |
| Power Source | Lithium-ion battery, approximately 25 hours after a 3 hour full charge |
| Approvals | ATEX, CSA |
| Case Material | Explosion proof, dust and water resistant to IP-66/68 (2 m, 1 h) approval Drop height 23' (7.01 m) |
| Controls | Two buttons: POWER/MODE, AIR |
| Datalogging | Logs user ID, station ID, calibration and bump test history, alarm events and alarm interval trends |
| Dimension | 2.2 x 2.55 x 1.02" (approximately 58 x 65 x 26 mm) without rubber boot 2.4 x 2.63 x 1.06" (approximately 61 x 67 x 27 mm) with rubber boot |
| Weight | 0.22 lbs (approximately 100 g) without rubber booth 0.23 lbs (approximately 105 g) with rubber booth |
| Gas Detected | (CO) H2 compensated, carbon monoxide (CO), Hydrogen Sulfide (H2S), H2S only, combustible gases (methane as standard), oxygen |
| Types of Alarms | Gas Alarm: 3 Increasing alarms, STEL, TWA, overscale alarm. O2 decreasing/increasing. Trouble alarm: Sensor disconnection, low battery, circuit error, calibration range error |
| Operating Temperature and Humidity | Continuous environment: -4 to 122°F (-20 to 50°C), 10 to 90% RH, non-condensing Temporary environment, 15 minutes: -40 to 140°F (-40 to 60°C), 0 to 95% RH, non-condensing |
| Response Time | Within 30 seconds (T90) |
| Power Source | Lithium-ion battery, approximately 25 hours after a 3 hour full charge |
| Approvals | ATEX, CSA |
| Case Material | Explosion proof, dust and water resistant to IP-66/68 (2 m, 1 h) approval Drop height 23' (7.01 m) |
| Controls | Two buttons: POWER/MODE, AIR |
| Datalogging | Logs user ID, station ID, calibration and bump test history, alarm events and alarm interval trends |
| Dimension | 2.2 x 2.55 x 1.02" (approximately 58 x 65 x 26 mm) without rubber boot 2.4 x 2.63 x 1.06" (approximately 61 x 67 x 27 mm) with rubber boot |
| Weight | 0.22 lbs (approximately 100 g) without rubber booth 0.23 lbs (approximately 105 g) with rubber booth |
