Featuring a metal-in design, these 12 x 12" bags provide static protection for ESD-sensitive devices. For easy insertion, removal and reuse, the static shielding bags offers a zip-top design, and they're printed with the ESD protection symbol and a lot code for traceability.
Featuring a metal-in design, these 12 x 12" bags provide static protection for ESD-sensitive devices. For easy insertion, removal and reuse, the static shielding bags offers a zip-top design, and they're printed with the ESD protection symbol and a lot code for traceability.
Designed to provide a static-safe environment for ESD sensitive electronic devices, the bag is printed with an ESD protective symbol and a lot code for traceability and is manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding, and the exterior being static dissipative allows electrostatic charges to be removed when grounded.
Features
Physical | |
Tensile Strength | Typical value: 4600 psi, 32 mpa Testing method: ASTM D882 |
Puncture Resistance | Typical value: 12 lbs, 53 N Testing method: MIL-STD-3010C Method 2065 |
Seal Strength | Typical value: 11 lbs, 48 N Testing method: ASTM D882 |
Thickness | Typical value: 2.8 mils, 0.071 mm ±10% Testing method: MIL-STD-3010C Method 1003 |
Marking Adhesion | Typical value: Pass Testing method: IPC-TM-650 2.4.1 |
Transparency | Typical value: 40% Testing method: Tobias |
Electrical | |
ESD Shielding | Typical value: <10 nJ Testing method: ANSI/ESD STM11.31 |
Surface Resistance - Interior | Typical value: 1 x 104 to <1 x 1011 Ω Testing method: ANSI/ESD STM11.11 |
Surface Resistance - Exterior | Typical value: <1 x 1011 Ω Testing method: ANSI/ESD STM11.11 |
Static Decay | Typical value: <2 seconds Testing method: ETS 406D |
Cleanliness | |
Silicone | Typical value: Not detected Testing method: FTIR |
Heat Sealing Conditions | |
Temperature | 300 to 375°F (149 to 190°C) |
Time | 0.5 to 3.5 seconds |
Pressure | 30 to 70 psi, 206 to 482 kPa |
Physical | |
Tensile Strength | Typical value: 4600 psi, 32 mpa Testing method: ASTM D882 |
Puncture Resistance | Typical value: 12 lbs, 53 N Testing method: MIL-STD-3010C Method 2065 |
Seal Strength | Typical value: 11 lbs, 48 N Testing method: ASTM D882 |
Thickness | Typical value: 2.8 mils, 0.071 mm ±10% Testing method: MIL-STD-3010C Method 1003 |
Marking Adhesion | Typical value: Pass Testing method: IPC-TM-650 2.4.1 |
Transparency | Typical value: 40% Testing method: Tobias |
Electrical | |
ESD Shielding | Typical value: <10 nJ Testing method: ANSI/ESD STM11.31 |
Surface Resistance - Interior | Typical value: 1 x 104 to <1 x 1011 Ω Testing method: ANSI/ESD STM11.11 |
Surface Resistance - Exterior | Typical value: <1 x 1011 Ω Testing method: ANSI/ESD STM11.11 |
Static Decay | Typical value: <2 seconds Testing method: ETS 406D |
Cleanliness | |
Silicone | Typical value: Not detected Testing method: FTIR |
Heat Sealing Conditions | |
Temperature | 300 to 375°F (149 to 190°C) |
Time | 0.5 to 3.5 seconds |
Pressure | 30 to 70 psi, 206 to 482 kPa |