Reliable and efficient, the air ionizer test kit measures surface and offset voltage, and charge decay of ionization equipment. The charger used to place a ±1000V charge on the conductive plate makes it possible to measure discharge times of air ionization equipment per ANSI/ESD SP3.3 Periodic Verification of Air Ionizers.
Reliable and efficient, the air ionizer test kit measures surface and offset voltage, and charge decay of ionization equipment. The charger used to place a ±1000V charge on the conductive plate makes it possible to measure discharge times of air ionization equipment per ANSI/ESD SP3.3 Periodic Verification of Air Ionizers.
The air ionizer test kit has an enclosure that protects the meter from physical damage and minimizes wear.
Features
Applications
Performance | |
Measurement Range Low range: 0 to ± 2kV / inch |
|
Measurement Accuracy | Voltage monitor output: Better than ±5% of reading, 10 mV Voltage display: Better than ±5% of reading, ±2 counts |
Measurement Stability | ±10 counts |
Voltage Monitor | |
Output | 2 volts output at full scale |
Ratio | Low range: 1/1000 of the measured electrostatic field High range: 1/1000 of the measured electrostatic field |
Front Panel Meter | |
Voltage Display | 3 ½ digit LED display |
Range | Low: 0 to ±1.999 kV/inch High: 0 to ±19.99 kV/inch |
Display Resolution | Low range: 1 V/inch High range: 10 V/inch |
Sampling Rate | 3 readings per second |
Conductive Plate | |
Conductive Plate Assembly | Aluminum bracket, bare aluminum plate and teflon spacers isolate plate from bracket |
Voltage Output | Low range: 1/1000 of measured voltage High range: 1/10,000 of measured voltage |
Conductive Plate Area | 2.95 x 1.18" (7.5 x 3.0 cm) |
Conductive Plate Assembly Weight | 2.4 oz (68 g) |
Dimensions | 1.1 x 2.6 x 4.5" (2.8 x 6.6 x 11.4 cm) |
Charger Power Requirements | One 9 V alkaline battery |
Charger Output (Using Static Sensor with Conductive Plate) | 1.1 kV minimum for ± voltage |
General Specifications | |
Voltage Monitor Connection | 3/32" jack (2.5 mm) |
Tip | Signal |
Temperature | 50 to 86ºF (10 to 30ºC) |
Relative Humidity | To 80%, non-condensing |
Altitude | To 6561' (2000 m) |
Dimensions | 0.9 x 2.8 x 4.9" (24 x 70 x 126 mm) |
Weight | 4.9 oz (140 g) |
Performance | |
Measurement Range Low range: 0 to ± 2kV / inch |
|
Measurement Accuracy | Voltage monitor output: Better than ±5% of reading, 10 mV Voltage display: Better than ±5% of reading, ±2 counts |
Measurement Stability | ±10 counts |
Voltage Monitor | |
Output | 2 volts output at full scale |
Ratio | Low range: 1/1000 of the measured electrostatic field High range: 1/1000 of the measured electrostatic field |
Front Panel Meter | |
Voltage Display | 3 ½ digit LED display |
Range | Low: 0 to ±1.999 kV/inch High: 0 to ±19.99 kV/inch |
Display Resolution | Low range: 1 V/inch High range: 10 V/inch |
Sampling Rate | 3 readings per second |
Conductive Plate | |
Conductive Plate Assembly | Aluminum bracket, bare aluminum plate and teflon spacers isolate plate from bracket |
Voltage Output | Low range: 1/1000 of measured voltage High range: 1/10,000 of measured voltage |
Conductive Plate Area | 2.95 x 1.18" (7.5 x 3.0 cm) |
Conductive Plate Assembly Weight | 2.4 oz (68 g) |
Dimensions | 1.1 x 2.6 x 4.5" (2.8 x 6.6 x 11.4 cm) |
Charger Power Requirements | One 9 V alkaline battery |
Charger Output (Using Static Sensor with Conductive Plate) | 1.1 kV minimum for ± voltage |
General Specifications | |
Voltage Monitor Connection | 3/32" jack (2.5 mm) |
Tip | Signal |
Temperature | 50 to 86ºF (10 to 30ºC) |
Relative Humidity | To 80%, non-condensing |
Altitude | To 6561' (2000 m) |
Dimensions | 0.9 x 2.8 x 4.9" (24 x 70 x 126 mm) |
Weight | 4.9 oz (140 g) |