The Overhead Air Ionizer 991A is designed for use with sensitive electronic components where electrostatic discharge (ESD) is a problem. This Ionizer 991A provides fast static charge decay efficiency over an entire work surface area.
The Overhead Air Ionizer 991A is designed for use with sensitive electronic components where electrostatic discharge (ESD) is a problem. This Ionizer 991A provides fast static charge decay efficiency over an entire work surface area.
Equipped with task lighting, an ionization indicator light, and an integrated heater, it offers user-friendly operation while helping protect even the most sensitive components from ESD damage. The SCS 991A Overhead Ionizer meets the required limits of ANSI/ESD S20.20 tested per ANSI/ESD STM3.1 or ESD TR53.
Features
Applications
Input Voltage | 120VAC, 60Hz, 0.5A (fan low, heater/light off) 2.5A (fan high,heater/light on) |
Power Consumption | 200W (heater) |
Emitter Points | Stainless Steel |
Ion Emission | AC Ionization |
Balance Voltage | +/- 6V @ 18" from blower face |
Decay Time | <4.0 sec @ 18" center blower position; fan high-no diffusers |
Air Speed | 200-240 ft./min. (low to high), combined 3 fan output |
Audible Noise | 50 dBA fan low; 60 dBA fan high |
Indicator | Orange light for Ionization status |
Ozone Level | 0.02 ppm, measured @ 12" in front of unit 2 |
Operating Env | Temperature 32-122°F (0-50°C): humidity 30-70% RH non-condensing |
Input Voltage | 120VAC, 60Hz, 0.5A (fan low, heater/light off) 2.5A (fan high,heater/light on) |
Power Consumption | 200W (heater) |
Emitter Points | Stainless Steel |
Ion Emission | AC Ionization |
Balance Voltage | +/- 6V @ 18" from blower face |
Decay Time | <4.0 sec @ 18" center blower position; fan high-no diffusers |
Air Speed | 200-240 ft./min. (low to high), combined 3 fan output |
Audible Noise | 50 dBA fan low; 60 dBA fan high |
Indicator | Orange light for Ionization status |
Ozone Level | 0.02 ppm, measured @ 12" in front of unit 2 |
Operating Env | Temperature 32-122°F (0-50°C): humidity 30-70% RH non-condensing |