This is specifically engineered for use in the oil and petrochemical industries, this stainless steel sensor is completely sealed and explosion-proof. This has low impedance which allow for transistor circuit input. When mated with conduit, it provides positive protection against damage due to water, high humidity, oil, dirt, or corrosive liquids. ATEX listed for II 2 GEExm II T3. This explosion proof is for gas, vapor, and liquid.
This is specifically engineered for use in the oil and petrochemical industries, this stainless steel sensor is completely sealed and explosion-proof. This has low impedance which allow for transistor circuit input. When mated with conduit, it provides positive protection against damage due to water, high humidity, oil, dirt, or corrosive liquids. ATEX listed for II 2 GEExm II T3. This explosion proof is for gas, vapor, and liquid.
Shimpo XP12010 has a range of 0.01" (0.25 mm) typical clearance.
Features
Temperature Limits | -65 to 200°F (-53.8 to 93°C) |
Ambient Temperature Limits | -40 to 250°F (-40 to 121°C) |
Maximum Pressure | 3000 PSI |
Output Voltage | 60 VPP Minimum |
Coil Resistance | 170 to 210 Ohm |
Output Inductance | 80 mH TYP @ 1.0 kHz |
Dielectric | 500 VRMS @ 60 Hz |
Leakage Resistance | 100 M Ohms Minimum @ 500 V dc |
Cable | Shielded Teflon with Teflon Jacketed Leads |
Cable Length | 30" (762 mm) |
Housing | Stainless Steel with Epoxy Resin Potting |
Temperature Limits | -65 to 200°F (-53.8 to 93°C) |
Ambient Temperature Limits | -40 to 250°F (-40 to 121°C) |
Maximum Pressure | 3000 PSI |
Output Voltage | 60 VPP Minimum |
Coil Resistance | 170 to 210 Ohm |
Output Inductance | 80 mH TYP @ 1.0 kHz |
Dielectric | 500 VRMS @ 60 Hz |
Leakage Resistance | 100 M Ohms Minimum @ 500 V dc |
Cable | Shielded Teflon with Teflon Jacketed Leads |
Cable Length | 30" (762 mm) |
Housing | Stainless Steel with Epoxy Resin Potting |