Tek-Trol Tek-Flo Mass 1300D Steam Quality Meter, 2" nominal bore

Model: 1300D-V-16-C-150-L-DD-DCH-3AM-ST-P0-TK-3M-2AZ | Order No: 1300D-CONFIG

Be the first to review this product

Tek-Trol Tek-Flo Mass 1300D Steam Quality Meter, 2&quot; nominal bore-

Downloads: datasheet manual

More Tek-Trol Products

Ask an Expert

Tek-Trol Tek-Flo Mass 1300D Steam Quality Meter, 2" nominal bore

Model: 1300D-V-16-C-150-L-DD-DCH-3AM-ST-P0-TK-3M-2AZ | Order No: 1300D-CONFIG

Be the first to review this product

Predict the density of fluid, volumetric flow rate, and mass flow rate with this 2" (50 mm) meter that uses two flow meter technologies in combination: vortex and differential pressure. In addition, this allows fluid density to be found without information from an external source and provides several valuable outputs.

Sale Price	$9851.25 USD
Regular Price	$10650.00 USD
Availability	2 to 3 Weeks
Quantity

Tek-Trol 1300D-V-16-C-150-L-DD-DCH-3AM-ST-P0-TK-3M-2AZ Offers

Capable of calculating the density of changing gas mixtures, this flow meter can calculate natural gas, steam service, and wet natural gas service. Also, with the addition of two differential pressure transmitters, advanced diagnostic software continually monitors and verifies the meter’s performance.

Features

Can provide a measurement of fluid density, volumetric flow rate and mass flow rate without any fluid information being required from an external source
In steam service, the meter is able to provide a reliable steam quality (steam dryness) measurement as well as mass flow measurement
Able to calculate the density of changing gas mixtures (For example, natural gas is typically a composition of many different gases which can vary over time and vary by application)
More cost effective than current steam quality and wet gas meters on the market
Advanced diagnostic software is able to continually monitor and verify the meter's primary flow element health and confirm output uncertainty
Able to use with liquids, gases, and steam
Multiple readings from a single installed device reduces initial cost, installation cost and cost-of ownership over the lifetime of the instrument
Mass flow equations for additional diagnostic information and verification (real gas, ideal gas, AGA 8, API 2540)
Energy monitoring–ability to compute and output energy consumption with select fluids, like steam, water, and heat transfer fluids
Easy to install and commission
Reliable–no moving parts, no fluid to sensor contact
Temperature up to 750°F (400°C)
Pressure up to 1500 psi
Inline configuration for pipes from 2 to 12" (DN 50 to DN 300)
Field configurable ranges, outputs and displays
Remote electronics option available for use in harsh environments or locations with limited access
HART protocol communications – Standard
Natural gas service: Typically a composition of many different gases that can vary over time and vary by application.
Saturated steam service: This meter produces a reliable steam quality (dryness) measurement and reading of steam mass flow rate.
Wet natural gas service: This meter can provide a reliable liquid loading measurement and reading of gas mass flow rate.

Applications

Liquid flow monitoring
General water flows
Hydrocarbon fuel flow measurement

Tek-Trol 1300D-V-16-C-150-L-DD-DCH-3AM-ST-P0-TK-3M-2AZ Specifications

Accuracy	Temperature: ±2°F (±1°C) Pressure: ±0.3% of full scale Volumetric flow rate: Liquids: ±0.7% of rate Dry gas/steam: ±1.5% of rate Wet gas/steam: ±3% of rate Mass flow rate: Liquids: ±1% of rate Dry gas/steam: ±1% of rate Wet gas/steam: 5 to 10% of reading (Depending on percentage of liquid content and velocity) Calculated density (Calculated density is performed with a known fluid temperature and pressure): Liquids: ±0.3% of reading Dry gas/steam: ±0.5% of reading Predicted density (Predicted density is a function inherent to the combined technologies of vortex and differential pressure flow metering): Liquids: ±0.75% of reading Dry gas/steam: ±1% of reading Wet gas/steam: ±4% of reading Steam quality: Dry gas/steam: ±5% of reading Wet gas/steam: ±5% of reading
Repeatability	Mass flow rate: ±0.2% of rate Volumetric flow rate: ±0.1% of rate Temperature: ±0.2°F (±0.1°C) Pressure: ±0.05% of full scale Density: ±0.1% of reading
Stability Over 12 Months	Mass flow rate: ±0.2% of rate Volumetric flow rate: ±negligible Temperature: ±0.9°F (±0.5°C) Pressure: ±0.1% of full scale Density: ±0.1% of reading
Response Time	Adjustable from 1 to 100 seconds
Process and Ambient Temperature	Process standard temperature: -330 to 500°F (-200 to 260°C) Ambient operating: -40 to 140°F (-40 to 60°C) Ambient storage: -40 to 185°F (-40 to 85°C)
Power Requirements	DCH option: 12 to 36 V DC, 300 mA, 9 W maximum, (multiple outputs) AC option: 100 to 240 V AC, 50/60 Hz line power, 5 W (multiple outputs)
Display	Alphanumeric 2 line x 16 character LCD digital display Six pushbuttons for full field configuration Pushbuttons can be operated with magnetic wand without removal of enclosure covers Display can be mounted in 90° intervals for better viewing
Output Signals	Analog: 4 to 20 mA Alarm: Solid state relay, 40 V DC Totalizer pulse: 50 millisecond pulse, 40 V DC Volumetric or loop powered mass: One analog, one totalizer pulse, HART
Wetted Materials	Standard 316L stainless steel
Approvals Pending	FM, FMC: CLASS I, DIV. 1, GROUPS B,C,D CLASS II/III, DIV. 1, GROUPS E,F,G Type 4X and IP66, T6, Ta = -40 to 60°C ATEX II 2 G Ex d IIB + H2 T6 II 2 D EX tD A21 IP66 T85°C, Ta = -40 to 60°C IECEx Ex d IIB + H2 T6 Ex tD A21 IP66 T85°C, Ta = -40 to 60°C

Click here for complete specifications on the Tek-Trol 1300D-V-16-C-150-L-DD-DCH-3AM-ST-P0-TK-3M-2AZ

What's included with the Tek-Trol 1300D-V-16-C-150-L-DD-DCH-3AM-ST-P0-TK-3M-2AZ

Tek-Trol Tek-Flo Mass 1300D Steam Quality Meter, 2" nominal bore

datasheet for the Tek-Trol Tek-Flo Mass 1300D Steam Quality Meter, 2" nominal bore manual for the Tek-Trol Tek-Flo Mass 1300D Steam Quality Meter, 2" nominal bore

Ask a question about Tek-Trol Tek-Flo Mass 1300D Steam Quality Meter, 2" nominal bore

Customer Reviews for the Tek-Trol 1300D-V-16-C-150-L-DD-DCH-3AM-ST-P0-TK-3M-2AZ

Description ➕➖

Tek-Trol 1300D-V-16-C-150-L-DD-DCH-3AM-ST-P0-TK-3M-2AZ Offers

Features

Can provide a measurement of fluid density, volumetric flow rate and mass flow rate without any fluid information being required from an external source
In steam service, the meter is able to provide a reliable steam quality (steam dryness) measurement as well as mass flow measurement
Able to calculate the density of changing gas mixtures (For example, natural gas is typically a composition of many different gases which can vary over time and vary by application)
More cost effective than current steam quality and wet gas meters on the market
Advanced diagnostic software is able to continually monitor and verify the meter's primary flow element health and confirm output uncertainty
Able to use with liquids, gases, and steam
Multiple readings from a single installed device reduces initial cost, installation cost and cost-of ownership over the lifetime of the instrument
Mass flow equations for additional diagnostic information and verification (real gas, ideal gas, AGA 8, API 2540)
Energy monitoring–ability to compute and output energy consumption with select fluids, like steam, water, and heat transfer fluids
Easy to install and commission
Reliable–no moving parts, no fluid to sensor contact
Temperature up to 750°F (400°C)
Pressure up to 1500 psi
Inline configuration for pipes from 2 to 12" (DN 50 to DN 300)
Field configurable ranges, outputs and displays
Remote electronics option available for use in harsh environments or locations with limited access
HART protocol communications – Standard
Natural gas service: Typically a composition of many different gases that can vary over time and vary by application.
Saturated steam service: This meter produces a reliable steam quality (dryness) measurement and reading of steam mass flow rate.
Wet natural gas service: This meter can provide a reliable liquid loading measurement and reading of gas mass flow rate.

Applications

Liquid flow monitoring
General water flows
Hydrocarbon fuel flow measurement

Specifications ➕➖

Tek-Trol 1300D-V-16-C-150-L-DD-DCH-3AM-ST-P0-TK-3M-2AZ Specifications

Accuracy	Temperature: ±2°F (±1°C) Pressure: ±0.3% of full scale Volumetric flow rate: Liquids: ±0.7% of rate Dry gas/steam: ±1.5% of rate Wet gas/steam: ±3% of rate Mass flow rate: Liquids: ±1% of rate Dry gas/steam: ±1% of rate Wet gas/steam: 5 to 10% of reading (Depending on percentage of liquid content and velocity) Calculated density (Calculated density is performed with a known fluid temperature and pressure): Liquids: ±0.3% of reading Dry gas/steam: ±0.5% of reading Predicted density (Predicted density is a function inherent to the combined technologies of vortex and differential pressure flow metering): Liquids: ±0.75% of reading Dry gas/steam: ±1% of reading Wet gas/steam: ±4% of reading Steam quality: Dry gas/steam: ±5% of reading Wet gas/steam: ±5% of reading
Repeatability	Mass flow rate: ±0.2% of rate Volumetric flow rate: ±0.1% of rate Temperature: ±0.2°F (±0.1°C) Pressure: ±0.05% of full scale Density: ±0.1% of reading
Stability Over 12 Months	Mass flow rate: ±0.2% of rate Volumetric flow rate: ±negligible Temperature: ±0.9°F (±0.5°C) Pressure: ±0.1% of full scale Density: ±0.1% of reading
Response Time	Adjustable from 1 to 100 seconds
Process and Ambient Temperature	Process standard temperature: -330 to 500°F (-200 to 260°C) Ambient operating: -40 to 140°F (-40 to 60°C) Ambient storage: -40 to 185°F (-40 to 85°C)
Power Requirements	DCH option: 12 to 36 V DC, 300 mA, 9 W maximum, (multiple outputs) AC option: 100 to 240 V AC, 50/60 Hz line power, 5 W (multiple outputs)
Display	Alphanumeric 2 line x 16 character LCD digital display Six pushbuttons for full field configuration Pushbuttons can be operated with magnetic wand without removal of enclosure covers Display can be mounted in 90° intervals for better viewing
Output Signals	Analog: 4 to 20 mA Alarm: Solid state relay, 40 V DC Totalizer pulse: 50 millisecond pulse, 40 V DC Volumetric or loop powered mass: One analog, one totalizer pulse, HART
Wetted Materials	Standard 316L stainless steel
Approvals Pending	FM, FMC: CLASS I, DIV. 1, GROUPS B,C,D CLASS II/III, DIV. 1, GROUPS E,F,G Type 4X and IP66, T6, Ta = -40 to 60°C ATEX II 2 G Ex d IIB + H2 T6 II 2 D EX tD A21 IP66 T85°C, Ta = -40 to 60°C IECEx Ex d IIB + H2 T6 Ex tD A21 IP66 T85°C, Ta = -40 to 60°C