The kit contain a thickness gauge(inches), roll of coarse film, roll of X-coarse film, burnishing tool, and complete instructions for use.
The kit contain a thickness gauge(inches), roll of coarse film, roll of X-coarse film, burnishing tool, and complete instructions for use.
Measurement of surface profile of blasted steel is necessary to ensure adequate blast profile for coatings adhesion. This kit contains everything required for testing surface profile, in a plastic case. The replica tape is compressed against the blasted surface using the included burnishing tool, taking on the impression or replica of the blast profile, which is then measured using the gauge, which is specifically designed for this application. The tape provides a permanent record of surface profile, making it possible to ensure conformance to specifications for steel preparation prior to coatings application.
Features
Gauge Range | 1.3 to 3.3 mils/32 to 85 µm |
Coarse | 0.8 to 2.5 mils/20 to 64 microns |
X-Coarse | 1.5 to 4.5 mils/40 to 115 microns |
Gauge Range | 1.3 to 3.3 mils/32 to 85 µm |
Coarse | 0.8 to 2.5 mils/20 to 64 microns |
X-Coarse | 1.5 to 4.5 mils/40 to 115 microns |