- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
The Modbus display serves as a display tool for Modbus data and comes enclosed in a box for easy installation.
The Modbus display serves as a display tool for Modbus data and comes enclosed in a box for easy installation.
The Modbus display serves as a display tool for Modbus data and comes enclosed in a box for easy installation.
Features
Applications
| AC Power Source | 120 VAC 50/60 Hz, line-to-neutral; internal fuse |
| Fuse Ratings | 200 mA at 250 5 x 20 mm Fast-Blow |
| AC Power Voltage Tolerance | (90 to 132 VAC) for 120 V |
| AC Power Frequency | 50/60 Hz |
| AC Power Termination | 2-position Euro-style pluggable connector (max wire size 12 gauge) |
| Alternate DC Power Source | 12 VDC, 300 mA external current limiting required (auxiliary input disabled if line connected) |
| Terminal Block Torque | 4.9 in-lb (0.56 N-m) |
| Operating Temperature Range | 32 to 122°F (0 to 50°C); <95% RH non-condensing; indoor use only |
| Storage Temperature Range | 0 to 50°C (-20 to 70°C) |
| Interface | Downstream: RS-485; upstream: RS-485, RS-232 |
| Protocol | Modbus RTU |
| Baud Rate | UI-selectable: 2400, 4800, 9600, 19200 |
| Parity | UI-selectable: NONE, ODD, EVEN |
| Communication Format | 8 data bits, 1 start bit, 1 stop bit |
| RS-485 | 1/4 load transceivers; duplex is UI-selectable: 2-wire or 4-wire; 5-position Euro-style pluggable connector |
| RS-232 (Upstream Only) | DCE, no handshaking; DB-9 connection; pin 2: transmitted data from display; pin 3: received data to display; pin 5: ground |
| Terminal Block Torque | 4.4 in-lb (0.5 N-m) |
| Number/Function | 4 (METER, UP, DOWN, SELECT) |
| Type | Contact closure or pull-to-ground (10 mA max) |
| Isolation | Optical to 2,500 VAC |
| Sense | UI-selectable: N.O. or N.C. (i.e. closed = alarm or open = alarm) |
| Terminal Block Torque | 3.5 to 4.4 in-lb (0.4 to 0.5 N-m) |
| Size | 1 x 4" (2.54 x 10.2 cm) visible area, 2 lines x 16 characters per line |
| Backlight | Green, UI-adjustable brightness in 10 steps |
| Status (Tri-Color LED) | Green = normal operation; yellow = warning; red = alarm |
| Warranty | 5 years limited |
| AC Power Source | 120 VAC 50/60 Hz, line-to-neutral; internal fuse |
| Fuse Ratings | 200 mA at 250 5 x 20 mm Fast-Blow |
| AC Power Voltage Tolerance | (90 to 132 VAC) for 120 V |
| AC Power Frequency | 50/60 Hz |
| AC Power Termination | 2-position Euro-style pluggable connector (max wire size 12 gauge) |
| Alternate DC Power Source | 12 VDC, 300 mA external current limiting required (auxiliary input disabled if line connected) |
| Terminal Block Torque | 4.9 in-lb (0.56 N-m) |
| Operating Temperature Range | 32 to 122°F (0 to 50°C); <95% RH non-condensing; indoor use only |
| Storage Temperature Range | 0 to 50°C (-20 to 70°C) |
| Interface | Downstream: RS-485; upstream: RS-485, RS-232 |
| Protocol | Modbus RTU |
| Baud Rate | UI-selectable: 2400, 4800, 9600, 19200 |
| Parity | UI-selectable: NONE, ODD, EVEN |
| Communication Format | 8 data bits, 1 start bit, 1 stop bit |
| RS-485 | 1/4 load transceivers; duplex is UI-selectable: 2-wire or 4-wire; 5-position Euro-style pluggable connector |
| RS-232 (Upstream Only) | DCE, no handshaking; DB-9 connection; pin 2: transmitted data from display; pin 3: received data to display; pin 5: ground |
| Terminal Block Torque | 4.4 in-lb (0.5 N-m) |
| Number/Function | 4 (METER, UP, DOWN, SELECT) |
| Type | Contact closure or pull-to-ground (10 mA max) |
| Isolation | Optical to 2,500 VAC |
| Sense | UI-selectable: N.O. or N.C. (i.e. closed = alarm or open = alarm) |
| Terminal Block Torque | 3.5 to 4.4 in-lb (0.4 to 0.5 N-m) |
| Size | 1 x 4" (2.54 x 10.2 cm) visible area, 2 lines x 16 characters per line |
| Backlight | Green, UI-adjustable brightness in 10 steps |
| Status (Tri-Color LED) | Green = normal operation; yellow = warning; red = alarm |
| Warranty | 5 years limited |
