Take the pain out of meeting your thermal loop requirements, this vertical ⅛ DIN PID controller offers control options to reduce system complexity and thermal loop ownership cost. In addition, it features a power supply of 100 to 240 V AC and two digital I/O points.
Take the pain out of meeting your thermal loop requirements, this vertical ⅛ DIN PID controller offers control options to reduce system complexity and thermal loop ownership cost. In addition, it features a power supply of 100 to 240 V AC and two digital I/O points.
Provides a wide range of serial communications capabilities, this panel mount controller is ideal for solving your thermal loop requirements.
Features
Applications
Controller | User-selectable heat/cool, on-off, P, PI, PD, PID or alarm action, not valid for limit controllers Auto-tune with TRU-TUNE+ adaptive control algorithm Control sampling rates: input = 10 Hz, outputs = 10 Hz |
Isolated Serial Communications | EIA 485 Modbus® RTU |
Wiring Termination - Touch-Safe Terminals | Input, power and controller output terminals are touch safe, removable, 12 to 22 AWG |
Universal Input | Thermocouple, grounded or ungrounded sensors >20 MΩ input impedance, 3 μA open sensor detection, 2 kΩ source resistance maximum RTD 2- or 3-wire, platinum, 100 Ω and 1000 Ω at 32°F (0°C) calibration to DIN curve (0.00385 Ω/Ω/°C) Process, 0 to 20 mA at 100 Ω, or 0 to 10 V DC at 20 kΩ, 0 to 50 mV at 20 MΩ, 0 to 1000 Ω potentionmeter; scalable; inverse scaling |
Functional Operating Range | Type J: -346 to 2192°F (-210 to 1200°C) Type K: -454 to 2500°F (-270 to 1371°C) Type T: -454 to 750°F (-270 to 400°C) Type E: -454 to 1832°F (-270 to 1000°C) Type N: -454 to 2372°F (-270 to 1300°C) Type C: 32 to 4200°F (0 to 2315°C) Type D: 32 to 4200°F (0 to 2315°C) Type F: 32 to 2449°F (0 to 1343°C) Type R: -58 to 3214°F (-50 to 1767°C) Type S: -58 to 3214°F (-50 to 1767°C) Type B: 32 to 3300°F (0 to 1816°C) RTD (DIN): -328 to 1472°F (-200 to 800°C) Process: -1999 to 9999 units |
Accuracy | Calibration accuracy and sensor conformity: ±0.1% of span, ±1°C at the calibrated ambient temperature and rated line voltage Types R, S, B; 0.2% Type T below -50°C; 0.2% Calibration ambient temperature at 77°F ±5°F (25°C ±3°C) Accuracy span: 1000°F (540°C) minimum Temperature stability: ±0.1°F/°F (±0.1°C/°C) rise in ambient maximum |
Digital Inputs | DC voltage Maximum input: 36 V at 3 mA Logic: minimum high state 3 V at 0.25 mA, maximum low state 2 V Dry contact Logic: minimum open resistance 10 kΩ, maximum closed resistance 50 Ω Maximum short circuit: 20 mA |
Two Digital I/O | Update rate: 10 Hz Input type: User-selectable, DC voltage or dry contact Output type: Switched DC Output voltage: 24 V Output 5: 24 mA maximum or drive one 3-pole DIN-A-MITE® Output 6: 10 mA maximum |
Output Hardware | Electromechanical relay, Form A, 24 to 240 V AC or 30 V DC maximum, 5 A resistive load, 100,000 cycles at rated load, 120/240 at 125 VA or 24 V AC at 25 VA pilot duty Electromechanical relay, Form C, 24 to 240 V AC or 30 V DC maximum, 5 A resistive load, 100,000 cycles at rated load, 120/240 at 125 VA or 24 V AC at 25 VA pilot duty |
Operator Interface | Dual 4-digit, 7-segment LED displays Advance, infinity, up and down keys, plus two programmable EZ-KEY's Typical display update rate: 1 Hz |
Line Voltage/Power | Maximum power consumption: 14 VA Data retention upon power failure via nonvolatile memory Compliant with SEMI F47-0200, Figure R1-1 voltage sag requirements at 24 V AC or higher |
Environment | Operating temperature: 0 to 149°F (-18 to 65°C) Storage temperature: -40 to 185°F (-40 to 85°C) Relative humidity: 0 to 90% RH, non-condensing |
Agency Approvals | cULus® UL®/EN/CSA C22.2 No 61010-1 Listed, File E185611 CE, RoHS by design, W.E.E.E. EtherNet/IP™ and DeviceNet™ ODVA Conformance Tested |
DIN Size | ⅛ |
Dimensions | 4.68 x 2.16 x 3.95" (118.9 x 54.9 x 100.3 mm) |
Weight | 10 oz (284 g) |
Controller | User-selectable heat/cool, on-off, P, PI, PD, PID or alarm action, not valid for limit controllers Auto-tune with TRU-TUNE+ adaptive control algorithm Control sampling rates: input = 10 Hz, outputs = 10 Hz |
Isolated Serial Communications | EIA 485 Modbus® RTU |
Wiring Termination - Touch-Safe Terminals | Input, power and controller output terminals are touch safe, removable, 12 to 22 AWG |
Universal Input | Thermocouple, grounded or ungrounded sensors >20 MΩ input impedance, 3 μA open sensor detection, 2 kΩ source resistance maximum RTD 2- or 3-wire, platinum, 100 Ω and 1000 Ω at 32°F (0°C) calibration to DIN curve (0.00385 Ω/Ω/°C) Process, 0 to 20 mA at 100 Ω, or 0 to 10 V DC at 20 kΩ, 0 to 50 mV at 20 MΩ, 0 to 1000 Ω potentionmeter; scalable; inverse scaling |
Functional Operating Range | Type J: -346 to 2192°F (-210 to 1200°C) Type K: -454 to 2500°F (-270 to 1371°C) Type T: -454 to 750°F (-270 to 400°C) Type E: -454 to 1832°F (-270 to 1000°C) Type N: -454 to 2372°F (-270 to 1300°C) Type C: 32 to 4200°F (0 to 2315°C) Type D: 32 to 4200°F (0 to 2315°C) Type F: 32 to 2449°F (0 to 1343°C) Type R: -58 to 3214°F (-50 to 1767°C) Type S: -58 to 3214°F (-50 to 1767°C) Type B: 32 to 3300°F (0 to 1816°C) RTD (DIN): -328 to 1472°F (-200 to 800°C) Process: -1999 to 9999 units |
Accuracy | Calibration accuracy and sensor conformity: ±0.1% of span, ±1°C at the calibrated ambient temperature and rated line voltage Types R, S, B; 0.2% Type T below -50°C; 0.2% Calibration ambient temperature at 77°F ±5°F (25°C ±3°C) Accuracy span: 1000°F (540°C) minimum Temperature stability: ±0.1°F/°F (±0.1°C/°C) rise in ambient maximum |
Digital Inputs | DC voltage Maximum input: 36 V at 3 mA Logic: minimum high state 3 V at 0.25 mA, maximum low state 2 V Dry contact Logic: minimum open resistance 10 kΩ, maximum closed resistance 50 Ω Maximum short circuit: 20 mA |
Two Digital I/O | Update rate: 10 Hz Input type: User-selectable, DC voltage or dry contact Output type: Switched DC Output voltage: 24 V Output 5: 24 mA maximum or drive one 3-pole DIN-A-MITE® Output 6: 10 mA maximum |
Output Hardware | Electromechanical relay, Form A, 24 to 240 V AC or 30 V DC maximum, 5 A resistive load, 100,000 cycles at rated load, 120/240 at 125 VA or 24 V AC at 25 VA pilot duty Electromechanical relay, Form C, 24 to 240 V AC or 30 V DC maximum, 5 A resistive load, 100,000 cycles at rated load, 120/240 at 125 VA or 24 V AC at 25 VA pilot duty |
Operator Interface | Dual 4-digit, 7-segment LED displays Advance, infinity, up and down keys, plus two programmable EZ-KEY's Typical display update rate: 1 Hz |
Line Voltage/Power | Maximum power consumption: 14 VA Data retention upon power failure via nonvolatile memory Compliant with SEMI F47-0200, Figure R1-1 voltage sag requirements at 24 V AC or higher |
Environment | Operating temperature: 0 to 149°F (-18 to 65°C) Storage temperature: -40 to 185°F (-40 to 85°C) Relative humidity: 0 to 90% RH, non-condensing |
Agency Approvals | cULus® UL®/EN/CSA C22.2 No 61010-1 Listed, File E185611 CE, RoHS by design, W.E.E.E. EtherNet/IP™ and DeviceNet™ ODVA Conformance Tested |
DIN Size | ⅛ |
Dimensions | 4.68 x 2.16 x 3.95" (118.9 x 54.9 x 100.3 mm) |
Weight | 10 oz (284 g) |