Small, compact and very tough, this Current Probe is designed for measurements from 1mA to 10A AC. The "clothes pin" shape makes it ideal for use in tight areas, such as breaker panels, controller panels or outlets. They are excellent companions to all DMMs.
Small, compact and very tough, this Current Probe is designed for measurements from 1mA to 10A AC. The "clothes pin" shape makes it ideal for use in tight areas, such as breaker panels, controller panels or outlets. They are excellent companions to all DMMs.
The MN114 is a general purpose mini probe which offers 1mA to 10A AC, continuous cycle current range. The output signal is 100mV AC/A AC (1V at 10A). It was designed to optimize measurements on 5A signals. The output termination is a 5ft lead with safety 4mm banana plug.
Features
Applications
Nominal Range | 10A |
Measurement Range | 1mA to 10A |
Transformation Ratio | Voltage output |
Output Signal | 100mV AC/A AC (1V at 10A) |
Accuracy (10A Range) | 1mA to 10A 1mA to 10A: 2% of Reading ± 2mA 1mA to 10A 40Hz to 3kHz: 3.5% of Reading ± 2mA |
Phase Shift (10A Range) | 45 to 65Hz 100mA to 10A: ≤8° |
Overload | 20A continuous |
Frequency Range | 30Hz to 5kHz |
Load Impedance | 100Ω min |
Working/Common Mode Voltage | 250V AC |
Output Termination | 5ft Lead |
Nominal Range | 10A |
Measurement Range | 1mA to 10A |
Transformation Ratio | Voltage output |
Output Signal | 100mV AC/A AC (1V at 10A) |
Accuracy (10A Range) | 1mA to 10A 1mA to 10A: 2% of Reading ± 2mA 1mA to 10A 40Hz to 3kHz: 3.5% of Reading ± 2mA |
Phase Shift (10A Range) | 45 to 65Hz 100mA to 10A: ≤8° |
Overload | 20A continuous |
Frequency Range | 30Hz to 5kHz |
Load Impedance | 100Ω min |
Working/Common Mode Voltage | 250V AC |
Output Termination | 5ft Lead |