Fluke 753 Documenting Process Calibrator

Model: 753 | UPC: 095969590402

Fluke 753 Documenting Process Calibrator

Model: 753 | UPC: 095969590402

Equipped with a USB interface and communication cable, this process calibrator can source, simulate, and measure pressure, temperature, and electrical signals. Users can download procedures, lists, and instructions created with software, and even upload data for printing, archiving, and analysis.

Equipped with a USB interface and communication cable, this process calibrator can source, simulate, and measure pressure, temperature, and electrical signals. Users can download procedures, lists, and instructions created with software, and even upload data for printing, archiving, and analysis.

Your Price $8520.99 USD
Availability 5 to 6 Weeks
Quantity

Traceable In-House Calibration Certificate for your 753 Documenting Process Calibrator

Traceable In-House Calibration Certificate for your 753 Documenting Process Calibrator

Fluke 753 Offers

Powerful and efficient, this calibrator features source measurement capabilities for all common process parameters. Users can automate calibration procedures and capture data for documentation. Additionally, the process calibrator meets standards such as ISO 9000, FDA, EPA, and OSHA regulations.

Features

  • Full-featured documenting process calibrator for calibrating and troubleshooting
  • Measures volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Sources and simulate volts, mA, pressure, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Powers transmitters during test using loop supply with simultaneous mA measurement
  • Measures and sources pressure
  • Allows you to creates and run automated as-found/as-left procedures to satisfy quality programs or regulations, and record and document results
  • Holds up to a full week of downloaded procedures and calibration results
  • Offers many flexible features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay
  • Offers compatibility with DPCTrack2 and many other asset management software packages
  • Bright white dual display for reading both sourced and measured parameters simultaneously
  • Easy-to-use multi-lingual interface
  • Gas gauge and rechargeable Li-Ion battery for 10 hour uninterrupted use

Fluke 753 Specifications

Measurement Accuracy
Voltage DC Range/resolution: 100 mV, 3 V, 30 V, 300 V
1 year: 0.02% + 0.005 mV, 0.02% + 0.00005 V, 0.02% + 0.0005 V, 0.05% + 0.05 V
2 years: 0.03% + 0.005 mV, 0.03% + 0.00005 V, 0.03% + 0.0005 V, 0.07% + 0.05 V
Voltage AC Range/resolution: 3 (40 to 500 Hz)/0.001 V, 30 (40 to 500 Hz)/0.01 V, 300 (40 to 500 Hz)/0.1 V
1 year: 0.5% + 0.002 V, 0.5% + 0.02 V, 0.5% + 0.2 V
2 years: 1.0% + 0.004 V, 1.0% + 0.04 V, 1.0% + 0.2 V
Current DC Range/resolution: 30 mA, 110 mA
1 year: 0.01% + 5 µA, 0.01% + 20 µA
2 years: 0.015% + 7 µA, 0.015% + 30 µA
Resistance Range/resolution: 10 Ω, 100 Ω, 1 kΩ, 10 kΩ
1 year: 0.05% + 50 mΩ, 0.05% + 50 mΩ, 0.05% + 500 mΩ, 0.1% + 10 Ω
2 years: 0.07% + 70 mΩ, 0.07% + 70 mΩ, 0.07% + 0.5 Ω, 0.15% + 15 Ω
Frequency Range/resolution: 1.00 to 110.00 Hz/0.01 Hz, 110.1 to 1100.0 Hz/0.1 Hz, 1.101 to 11.000 kHz/0.001 kHz, 11.01 to 50.00 kHz/0.01 kHz
2 years: 0.05 Hz, 0.5 Hz, 0.005 kHz, 0.05 kHz
Source Accuracy
Voltage DC Range/resolution: 100 mV, 1 V, 15 V
1 year: 0.01% + 0.005 mV, 0.01% + 0.00005 V, 0.01% + 0.0005 V
2 years: 0.015% + 0.005 mV, 0.015% + 0.0005 V, 0.015% + 0.0005 V
Current DC Range/resolution: 22 mA (source), current sink (simulate)
1 year: 0.01% + 0.003 mA, 0.02% + 0.007 mA
2 years: 0.02% + 0.003 mA, 0.04% + 0.007 mA
Resistance Range/resolution: 10 Ω, 100 Ω, 1 kΩ, 10 kΩ
1 year: 0.01% + 10 mΩ, 0.01% + 20 mΩ, 0.02% + 0.2 Ω, 0.02% + 3 Ω
2 years: 0.015% + 15 mΩ, 0.015% + 30 mΩ, 0.03% + 0.3 Ω, 0.03% + 5 Ω
Frequency Range/resolution: 0.1 to 10.99 Hz, 0.01 to 10.99 Hz, 11.00 to 109.99 Hz, 110.0 to 1099.9 Hz, 1.100 to 21.999 kHz, 22.000 to 50.000 kHz
2 years: 0.01 Hz, 0.01 Hz, 0.1 Hz, 0.1 Hz, 0.002 kHz, 0.005 kHz
Technical Data
Data Log Functions Measure functions: Voltage, current, resistance, frequency, temperature, pressure
Reading rate: 1, 2, 5, 10, 20, 30, or 60 readings/minute
Maximum record length: 8000 readings (7980 for 30 or 60 readings/minute)
Ramp Functions Source functions: Voltage, current, resistance, frequency, temperature
Rate: 4 steps/second
Trip detect: Continuity or voltage (continuity detection not available when sourcing current)
Loop Power Function Voltage: Selectable, 26 V
Accuracy: 10%, 18 V minimum at 22 mA
Maximum current: 25 mA, short circuit protected
Maximum input voltage: 50 V DC
Step Functions Source functions: Voltage, current, resistance, frequency, temperature
Manual step: Selectable step, change with arrow buttons
Autostep: Fully programmable for function, start delay, step value, time per step, repeat
Environmental Specifications
Operating Temperature 14 to 122°F (-10 to 50°C)
Storage Temperature -4 to 140°F (-20 to 60°C)
Dust/Water Resistance Meets IP52, IEC 529
Operating Altitude 9842' (3000 m) above mean sea level
Mechanical and General Specifications
Batteries Internal battery pack Li-ion: 7.2 V, 4400 mAh, 30 Wh
Battery Life >8 hours typical
Battery Replacement Via snap-shut door without opening calibrator; no tools required
Side Port Connections Pressure module connector
USB Connector to interface to your PC
Connection for optional battery charger/eliminator
Data Storage Capacity 1 week of calibration procedures results
90 Day Specifications The standard specification interval are 1 and 2 years
Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "% of output" specifications by 2.
Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant.
Dimensions 5.4 x 9.6 x 2.5" (136 x 245 x 63 mm)
Weight 2.7 lbs (1.2 kg)
Safety Specifications
Agency Approvals CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993
Click here for complete specifications on the Fluke 753

What's included with the Fluke 753

  • Calibrator
  • NIST-Traceable Calibration Report and Data
  • USB Communication Cable
  • 3 x Test Probes
  • 3 x Sets of "Extended Tooth"" Alligator Clips
  • 2 x Hook Clips
  • Carrying Case
  • Li-on Battery Pack
  • Battery Charger
  • DPCTrack 2™ Sample Software
  • Instruction Manual

Click on a category to view a selection of compatible accessories with the Fluke 753 Documenting Process Calibrator.





Fluke TP74 Lantern Tip Test Probe Set, 1000 V, 10 A TP74
Comes in a pair, these tip test probes include banana-style spring contacts with nickel-plated brass ends. Additionally, they feature a CAT II 1000 V, 10 A rating.




Fluke TL950 Mini-Pincer Test Lead Set TL950
30V RMS or 60V DC, and 15A.




Fluke TL940 Mini-Hook Test Lead Set TL940
30V RMS or 60V DC, and 15A.




Fluke AC285 SureGrip Alligator Clips AC285
Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.




Fluke AC280 SureGrip Hook Clips AC280
Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.




Fluke AC220 SureGrip Alligator Clips AC220
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves. For use with TL222 and TL224 test leads.




Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24
A K type thermocouple probe ideal for use in air and non-caustic gas measurements. Additionally, this air temperature probe features a bead protected by perforated baffle.




Fluke 80PK-22 SureGrip Immersion Temperature Probe 80PK-22
Compatible with any temperature measuring instrument that accepts K type thermocouples and features a miniature connector input. Additionally, this immersion temperature probe is for use in liquid and gels, and can also be used as a general-purpose probe.




Fluke 80PK-1 Bead Probe 80PK-1
A K type thermocouple ideal for general purpose applications.








Fluke 80CK-M type K Male Mini-Connectors 80CK-M
Yellow connectors with isothermal screw terminal. Pack of 2.




Fluke 80CJ-M type J Male Mini-Connectors 80CJ-M
Package of two male mini-connectors for use with Fluke 80TK or Fluke 50 Series.




Fluke 700TC1 Thermocouple Plug Kit 700TC1
10-Piece Thermocouple Mini-Plug Connector Kit for 700 and 740 Series.




Fluke 80PK-25 SureGrip Piercing Temperature Probe 80PK-25
A K type thermocouple probe that is suitable for the food industry, liquids, and gel.




Fluke 80PK-26 SureGrip Tapered Temperature Probe 80PK-26
Features a tapered tip, making this tapered temperature probe ideal for use in air, non-caustic gas, and surface applications.





Fluke 80PK-EXT Extension Wire Kit 80PK-EXT
Extension kit for type K thermocouple wires. Includes 3m of thermocouple wire and a pair of male/female mini-connectors.




Fluke 80PK-9 General Purpose Probe 80PK-9
Featuring a general purpose type-K thermocouple probe for surface, air and non-caustic gases. It has a measuring range of -40 to 260°C.




Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8
Uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces. Designed to reliably measure the temperature of pipes ¼" (6 mm) to 1⅜" (35 mm) in diameter, at temperatures between -20 and 300°F (-29 and 149°C), while retaining a long service life.




Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27
Compatible with any temperature measuring instrument that accepts type K thermocouples features a miniature connector input and a cold reference junction compensation. Additionally, this industrial surface temperature probe is ideal for surfaces in rugged environments.




Fluke 700PRV-1 Pressure Relief Valve Kit 700PRV-1
To be used with Fluke 700HTP-1 Hydraulic Test Pump.












Fluke 700HTH-1 Hydraulic Test Hose 700HTH-1
Hydraulic test hose 10,000 psi, 700 bar working pressure test hose that features stainless steel and nylon construction.




Fluke 700PCK Pressure Calibration Kit 700PCK
Calibrate pressure modules with your precision pressure standards with this pressure calibration kit. When installed on your PC, the Windows-based software steps you through as-found and as-left verifications, and a calibration adjustment. Kit comes with a power supply, an interface adapter, cables, and calibration software.




Fluke 700HTP-2 Hydraulic Test Pump 700HTP-2
The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules.




Fluke C700 Hard Carrying Case C700
For use with the Fluke 700 Series.




Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25
Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.








Ask a question about Fluke 753 Documenting Process Calibrator

Customer Reviews for the Fluke 753

Fluke 753 Offers

Powerful and efficient, this calibrator features source measurement capabilities for all common process parameters. Users can automate calibration procedures and capture data for documentation. Additionally, the process calibrator meets standards such as ISO 9000, FDA, EPA, and OSHA regulations.

Features

  • Full-featured documenting process calibrator for calibrating and troubleshooting
  • Measures volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Sources and simulate volts, mA, pressure, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Powers transmitters during test using loop supply with simultaneous mA measurement
  • Measures and sources pressure
  • Allows you to creates and run automated as-found/as-left procedures to satisfy quality programs or regulations, and record and document results
  • Holds up to a full week of downloaded procedures and calibration results
  • Offers many flexible features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay
  • Offers compatibility with DPCTrack2 and many other asset management software packages
  • Bright white dual display for reading both sourced and measured parameters simultaneously
  • Easy-to-use multi-lingual interface
  • Gas gauge and rechargeable Li-Ion battery for 10 hour uninterrupted use

Fluke 753 Specifications

Measurement Accuracy
Voltage DC Range/resolution: 100 mV, 3 V, 30 V, 300 V
1 year: 0.02% + 0.005 mV, 0.02% + 0.00005 V, 0.02% + 0.0005 V, 0.05% + 0.05 V
2 years: 0.03% + 0.005 mV, 0.03% + 0.00005 V, 0.03% + 0.0005 V, 0.07% + 0.05 V
Voltage AC Range/resolution: 3 (40 to 500 Hz)/0.001 V, 30 (40 to 500 Hz)/0.01 V, 300 (40 to 500 Hz)/0.1 V
1 year: 0.5% + 0.002 V, 0.5% + 0.02 V, 0.5% + 0.2 V
2 years: 1.0% + 0.004 V, 1.0% + 0.04 V, 1.0% + 0.2 V
Current DC Range/resolution: 30 mA, 110 mA
1 year: 0.01% + 5 µA, 0.01% + 20 µA
2 years: 0.015% + 7 µA, 0.015% + 30 µA
Resistance Range/resolution: 10 Ω, 100 Ω, 1 kΩ, 10 kΩ
1 year: 0.05% + 50 mΩ, 0.05% + 50 mΩ, 0.05% + 500 mΩ, 0.1% + 10 Ω
2 years: 0.07% + 70 mΩ, 0.07% + 70 mΩ, 0.07% + 0.5 Ω, 0.15% + 15 Ω
Frequency Range/resolution: 1.00 to 110.00 Hz/0.01 Hz, 110.1 to 1100.0 Hz/0.1 Hz, 1.101 to 11.000 kHz/0.001 kHz, 11.01 to 50.00 kHz/0.01 kHz
2 years: 0.05 Hz, 0.5 Hz, 0.005 kHz, 0.05 kHz
Source Accuracy
Voltage DC Range/resolution: 100 mV, 1 V, 15 V
1 year: 0.01% + 0.005 mV, 0.01% + 0.00005 V, 0.01% + 0.0005 V
2 years: 0.015% + 0.005 mV, 0.015% + 0.0005 V, 0.015% + 0.0005 V
Current DC Range/resolution: 22 mA (source), current sink (simulate)
1 year: 0.01% + 0.003 mA, 0.02% + 0.007 mA
2 years: 0.02% + 0.003 mA, 0.04% + 0.007 mA
Resistance Range/resolution: 10 Ω, 100 Ω, 1 kΩ, 10 kΩ
1 year: 0.01% + 10 mΩ, 0.01% + 20 mΩ, 0.02% + 0.2 Ω, 0.02% + 3 Ω
2 years: 0.015% + 15 mΩ, 0.015% + 30 mΩ, 0.03% + 0.3 Ω, 0.03% + 5 Ω
Frequency Range/resolution: 0.1 to 10.99 Hz, 0.01 to 10.99 Hz, 11.00 to 109.99 Hz, 110.0 to 1099.9 Hz, 1.100 to 21.999 kHz, 22.000 to 50.000 kHz
2 years: 0.01 Hz, 0.01 Hz, 0.1 Hz, 0.1 Hz, 0.002 kHz, 0.005 kHz
Technical Data
Data Log Functions Measure functions: Voltage, current, resistance, frequency, temperature, pressure
Reading rate: 1, 2, 5, 10, 20, 30, or 60 readings/minute
Maximum record length: 8000 readings (7980 for 30 or 60 readings/minute)
Ramp Functions Source functions: Voltage, current, resistance, frequency, temperature
Rate: 4 steps/second
Trip detect: Continuity or voltage (continuity detection not available when sourcing current)
Loop Power Function Voltage: Selectable, 26 V
Accuracy: 10%, 18 V minimum at 22 mA
Maximum current: 25 mA, short circuit protected
Maximum input voltage: 50 V DC
Step Functions Source functions: Voltage, current, resistance, frequency, temperature
Manual step: Selectable step, change with arrow buttons
Autostep: Fully programmable for function, start delay, step value, time per step, repeat
Environmental Specifications
Operating Temperature 14 to 122°F (-10 to 50°C)
Storage Temperature -4 to 140°F (-20 to 60°C)
Dust/Water Resistance Meets IP52, IEC 529
Operating Altitude 9842' (3000 m) above mean sea level
Mechanical and General Specifications
Batteries Internal battery pack Li-ion: 7.2 V, 4400 mAh, 30 Wh
Battery Life >8 hours typical
Battery Replacement Via snap-shut door without opening calibrator; no tools required
Side Port Connections Pressure module connector
USB Connector to interface to your PC
Connection for optional battery charger/eliminator
Data Storage Capacity 1 week of calibration procedures results
90 Day Specifications The standard specification interval are 1 and 2 years
Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "% of output" specifications by 2.
Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant.
Dimensions 5.4 x 9.6 x 2.5" (136 x 245 x 63 mm)
Weight 2.7 lbs (1.2 kg)
Safety Specifications
Agency Approvals CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993
Click here for complete specifications on the Fluke 753

What's included with the Fluke 753

  • Calibrator
  • NIST-Traceable Calibration Report and Data
  • USB Communication Cable
  • 3 x Test Probes
  • 3 x Sets of "Extended Tooth"" Alligator Clips
  • 2 x Hook Clips
  • Carrying Case
  • Li-on Battery Pack
  • Battery Charger
  • DPCTrack 2™ Sample Software
  • Instruction Manual

Click on a category to view a selection of compatible accessories with the Fluke 753 Documenting Process Calibrator.





Fluke TP74 Lantern Tip Test Probe Set, 1000 V, 10 A TP74
Comes in a pair, these tip test probes include banana-style spring contacts with nickel-plated brass ends. Additionally, they feature a CAT II 1000 V, 10 A rating.




Fluke TL950 Mini-Pincer Test Lead Set TL950
30V RMS or 60V DC, and 15A.




Fluke TL940 Mini-Hook Test Lead Set TL940
30V RMS or 60V DC, and 15A.




Fluke AC285 SureGrip Alligator Clips AC285
Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.




Fluke AC280 SureGrip Hook Clips AC280
Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.




Fluke AC220 SureGrip Alligator Clips AC220
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves. For use with TL222 and TL224 test leads.




Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24
A K type thermocouple probe ideal for use in air and non-caustic gas measurements. Additionally, this air temperature probe features a bead protected by perforated baffle.




Fluke 80PK-22 SureGrip Immersion Temperature Probe 80PK-22
Compatible with any temperature measuring instrument that accepts K type thermocouples and features a miniature connector input. Additionally, this immersion temperature probe is for use in liquid and gels, and can also be used as a general-purpose probe.




Fluke 80PK-1 Bead Probe 80PK-1
A K type thermocouple ideal for general purpose applications.








Fluke 80CK-M type K Male Mini-Connectors 80CK-M
Yellow connectors with isothermal screw terminal. Pack of 2.




Fluke 80CJ-M type J Male Mini-Connectors 80CJ-M
Package of two male mini-connectors for use with Fluke 80TK or Fluke 50 Series.




Fluke 700TC1 Thermocouple Plug Kit 700TC1
10-Piece Thermocouple Mini-Plug Connector Kit for 700 and 740 Series.




Fluke 80PK-25 SureGrip Piercing Temperature Probe 80PK-25
A K type thermocouple probe that is suitable for the food industry, liquids, and gel.




Fluke 80PK-26 SureGrip Tapered Temperature Probe 80PK-26
Features a tapered tip, making this tapered temperature probe ideal for use in air, non-caustic gas, and surface applications.





Fluke 80PK-EXT Extension Wire Kit 80PK-EXT
Extension kit for type K thermocouple wires. Includes 3m of thermocouple wire and a pair of male/female mini-connectors.




Fluke 80PK-9 General Purpose Probe 80PK-9
Featuring a general purpose type-K thermocouple probe for surface, air and non-caustic gases. It has a measuring range of -40 to 260°C.




Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8
Uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces. Designed to reliably measure the temperature of pipes ¼" (6 mm) to 1⅜" (35 mm) in diameter, at temperatures between -20 and 300°F (-29 and 149°C), while retaining a long service life.




Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27
Compatible with any temperature measuring instrument that accepts type K thermocouples features a miniature connector input and a cold reference junction compensation. Additionally, this industrial surface temperature probe is ideal for surfaces in rugged environments.




Fluke 700PRV-1 Pressure Relief Valve Kit 700PRV-1
To be used with Fluke 700HTP-1 Hydraulic Test Pump.












Fluke 700HTH-1 Hydraulic Test Hose 700HTH-1
Hydraulic test hose 10,000 psi, 700 bar working pressure test hose that features stainless steel and nylon construction.




Fluke 700PCK Pressure Calibration Kit 700PCK
Calibrate pressure modules with your precision pressure standards with this pressure calibration kit. When installed on your PC, the Windows-based software steps you through as-found and as-left verifications, and a calibration adjustment. Kit comes with a power supply, an interface adapter, cables, and calibration software.




Fluke 700HTP-2 Hydraulic Test Pump 700HTP-2
The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules.




Fluke C700 Hard Carrying Case C700
For use with the Fluke 700 Series.




Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25
Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.








Ask a question about Fluke 753 Documenting Process Calibrator

Customer Reviews for the Fluke 753

More Fluke Products

Between March 11 and June 30, 2024 spend $500 or more and get a free Fluke tool or bundle with your purchase.
Calibration Lab