The Fluke 754/750SW BU Documenting Process Calibrator with Hart communication and DPC/TRACK2 software kit provides full control over system management. The kit includes the necessary clips to accommodate any circuit setup. The included accessories allow for full functionality and easy transportation of the kit around the workplace.
Features
Software | DPC/TRACK2 |
Communication | Hart |
HART, the Highway Addressable Remote Transducer protocol, uses a 1200 baud Frequency Shift Keying (FSK) signal to superimpose digital information on the conventional 4 to 20 mA analog signal.
HART is an industry standard developed to define the communications protocol between intelligent field devices and a control system, HART is the most widely used digital communication protocol in the process industry. More than five million HART field instruments are installed in more than 100,000 plants worldwide. The HART protocol:
Process plants have taken advantage of smart transmitters, the need for a new generation of calibrators has emerged - calibrators that can communicate via industry standard digital protocols. This process calibrator combines HART communication capability in a documenting process calibrator to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART instrumentation. This process calibrator offers:
The field calibrator for HART instruments that's both powerful and easy to use
This process calibrator offers the most complete HART implementation of any process calibrator. This process calibrator:
This process calibrator is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers many of the communication capabilities of the 475 HART communicator except for the DD interpreter, which can read command set libraries from any HART supplier. This is not necessary for daily HART maintenance.
Pressure transmitter manufacturers have improved the accuracy and technology designed into these smart pressure measurement devices. Many conventional calibration tools have become inadequate or simply unable to test and calibrate these high accuracy pressure transmitters. Better test solutions are required.
Verifying and documenting the performance and adjusting a HART smart pressure transmitter can require a bucket full of tools. Performing this task with a HART enabled calibrator like this process calibrator simplifies the task and reduces what you need to carry.
Before going to the field, install the pressure module adapter to the hand pump with thread seal. Once the adapter is properly installed on the pump, changing modules to different pressure ranges is a snap, no tools required.
To get the accuracy needed to test these new high accuracy transmitters, match the pressure measurement standard range closely to the device tested. For example, use a 100 psi pressure module to calibrate and test a transmitter ranged at 100 psi. Industry standards suggest the measurement standard should be 4 to 10 times more accurate than the device being tested, so best-in-class accuracy is required.
This Documenting Process Calibrator-HART utilizes the 750P series pressure module and has the HART functionality built in to enable smart trims on transmitters. It can also document transmitter performance before and after adjustment and calculate pass/fail errors.
To perform the test:
Fluke 754: The HART calibrator that is easy to use.
Versatile HART protocol support
This process calibrator supports the commands contained in HART protocol version 5.7.
This process calibrator supports a substantial set of HART instructions:
Today's 754 supports device-specific instructions for a variety of popular instruments. Additional support may be added periodically with a simple software update available on diskette or via download for a modest upgrade fee.
Manufacturer | Pressure Instruments | Temperature Instruments | Coriolis Instruments |
ABB/Kent-Taylor | 600T | 658T1 | |
ABB/Hartmann & Braun | Contrans P1, AS 800 Series | ||
Endress & Hauser | CERABAR S, CERABAR M, DELTABAR S | TMT 1221, TMT 1821, TMT 1621 | |
Foxboro Eckardt | TI/RTT201 | ||
Foxboro/Invensys | I/A Pressure | ||
Fuji | FCX, FCXAZ | FRC | |
Honeywell | ST3000 | STT25T1, STT25H1 | |
Micro Motion | 2000, 2000IS, 9701, 9712, 9739 | ||
Moore Products | 3441 | ||
Rosemount | 1151, 2088, 3001C, 3051, 3051S | 3044C, 644, 3144, 3244, 3144P | |
Siemens | SITRANS P DS | ||
SMAR | SITRANS P DS, SITRANS P ES | ||
Viatran | LD301 | TT3011 | |
Wika | UNITRANS | ||
Yokogawa | EJA | YTA 110, 310 and 320 |
1Sensor trim not supported
HART Operating Modes Supported
Rugged and compact, this documenting process calibrator is powerful yet easy to use. Ideal for troubleshooting HART instrumentation, the calibrator offers communication and calibration functions in one tool. With a bright display and multi-lingual interface, the calibrator measures pressure, temperature, and electrical signals.
Create procedures, instructions, and action lists to deliver fast, easy documentation with this DCPTrack2 software. Compatible with the Fluke 753, 754, 743, and 744.
Click on a category to view a selection of compatible accessories with the Fluke FLUKE-754/750SW BU Documenting Process Calibrator and DPC/TRACK2 Software Bundle.
Software | DPC/TRACK2 |
Communication | Hart |
HART, the Highway Addressable Remote Transducer protocol, uses a 1200 baud Frequency Shift Keying (FSK) signal to superimpose digital information on the conventional 4 to 20 mA analog signal.
HART is an industry standard developed to define the communications protocol between intelligent field devices and a control system, HART is the most widely used digital communication protocol in the process industry. More than five million HART field instruments are installed in more than 100,000 plants worldwide. The HART protocol:
Process plants have taken advantage of smart transmitters, the need for a new generation of calibrators has emerged - calibrators that can communicate via industry standard digital protocols. This process calibrator combines HART communication capability in a documenting process calibrator to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART instrumentation. This process calibrator offers:
The field calibrator for HART instruments that's both powerful and easy to use
This process calibrator offers the most complete HART implementation of any process calibrator. This process calibrator:
This process calibrator is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers many of the communication capabilities of the 475 HART communicator except for the DD interpreter, which can read command set libraries from any HART supplier. This is not necessary for daily HART maintenance.
Pressure transmitter manufacturers have improved the accuracy and technology designed into these smart pressure measurement devices. Many conventional calibration tools have become inadequate or simply unable to test and calibrate these high accuracy pressure transmitters. Better test solutions are required.
Verifying and documenting the performance and adjusting a HART smart pressure transmitter can require a bucket full of tools. Performing this task with a HART enabled calibrator like this process calibrator simplifies the task and reduces what you need to carry.
Before going to the field, install the pressure module adapter to the hand pump with thread seal. Once the adapter is properly installed on the pump, changing modules to different pressure ranges is a snap, no tools required.
To get the accuracy needed to test these new high accuracy transmitters, match the pressure measurement standard range closely to the device tested. For example, use a 100 psi pressure module to calibrate and test a transmitter ranged at 100 psi. Industry standards suggest the measurement standard should be 4 to 10 times more accurate than the device being tested, so best-in-class accuracy is required.
This Documenting Process Calibrator-HART utilizes the 750P series pressure module and has the HART functionality built in to enable smart trims on transmitters. It can also document transmitter performance before and after adjustment and calculate pass/fail errors.
To perform the test:
Fluke 754: The HART calibrator that is easy to use.
Versatile HART protocol support
This process calibrator supports the commands contained in HART protocol version 5.7.
This process calibrator supports a substantial set of HART instructions:
Today's 754 supports device-specific instructions for a variety of popular instruments. Additional support may be added periodically with a simple software update available on diskette or via download for a modest upgrade fee.
Manufacturer | Pressure Instruments | Temperature Instruments | Coriolis Instruments |
ABB/Kent-Taylor | 600T | 658T1 | |
ABB/Hartmann & Braun | Contrans P1, AS 800 Series | ||
Endress & Hauser | CERABAR S, CERABAR M, DELTABAR S | TMT 1221, TMT 1821, TMT 1621 | |
Foxboro Eckardt | TI/RTT201 | ||
Foxboro/Invensys | I/A Pressure | ||
Fuji | FCX, FCXAZ | FRC | |
Honeywell | ST3000 | STT25T1, STT25H1 | |
Micro Motion | 2000, 2000IS, 9701, 9712, 9739 | ||
Moore Products | 3441 | ||
Rosemount | 1151, 2088, 3001C, 3051, 3051S | 3044C, 644, 3144, 3244, 3144P | |
Siemens | SITRANS P DS | ||
SMAR | SITRANS P DS, SITRANS P ES | ||
Viatran | LD301 | TT3011 | |
Wika | UNITRANS | ||
Yokogawa | EJA | YTA 110, 310 and 320 |
1Sensor trim not supported
HART Operating Modes Supported
Rugged and compact, this documenting process calibrator is powerful yet easy to use. Ideal for troubleshooting HART instrumentation, the calibrator offers communication and calibration functions in one tool. With a bright display and multi-lingual interface, the calibrator measures pressure, temperature, and electrical signals.
Create procedures, instructions, and action lists to deliver fast, easy documentation with this DCPTrack2 software. Compatible with the Fluke 753, 754, 743, and 744.
Click on a category to view a selection of compatible accessories with the Fluke FLUKE-754/750SW BU Documenting Process Calibrator and DPC/TRACK2 Software Bundle.