Fluke T5-1K/PRV240 Offers

Ideal for several measurements, this tester checks voltage, continuity, and current. The portable proving unit verifies the proper voltage measurement functionality of the voltage, continuity, and current tester.

The detachable, SlimReach^™ test probes are customized for national electrical standards. Plus, its tough test leads accept optional accessories such as clips and specialty probes. The test leads stow neatly in the back of the tester, making it easy to carry in your tool pouch.

Features

• Reliable electrical tester automatically measures volts AC and volts DC with precise digital resolution
• Automatically measure AC and DC voltage up to 1000 V with precise digital resolution
• Measure current up to 100 A without breaking the circuit with OpenJaw™ design
• Troubleshoot resistance problems up to 1000 Ω
• Work in tight spaces with detachable Slim Reach probe tips
• Withstands a 10' (3 m) drop
• Offers Auto-off mode to conserve battery life
• Fits into an optional holster that attaches to a belt and neatly stows test leads
• Protected to EN61010-1 CAT IV 600 V / CAT III 1000 V rating
• Integrated protection circuit allows it to stay connected to a voltage source longer than a solenoid tester
• UL and CSA approved

Automatically measure AC and DC voltage up to 1000 V with precise digital resolution

• Auto-selects between AC and DC voltage
• Suitable for industrial applications

Measure current up to 100 A without breaking the circuit with OpenJaw™ design

• OpenJaw™ design allows for fast and easy current measurement
• Measure current more safely without metallic contact

Troubleshoot resistance problems up to 1000 Ω

• Measure resistance when troubleshooting motors, HVAC/R systems or electrical systems
• Built in continuity beeper provides fast and easy go/no-go tests

Work in tight spaces with detachable Slim Reach probe tips

• Features a compact design with handy probe storage, easily fits in one hand
• The test lead slot in the back makes the meter an "extended handle" for the probe, leaving the other hand free to place the second lead
• Test leads accept Fluke accessory test clips

Fluke PRV240 Proving Unit

Reduces the risk of shock and arc flash by removing unnecessary exposure to a potentially hazardous electrical environment while verifying the functionality of test tools before and after absence or presence of voltage is checked.

Features

• Sources both AC and DC steady-state voltage - supplies 240 V DC/AC
• A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
• Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
• Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
• Long battery life - 5000 tests per set of four AA batteries

Test before touch

Provides a safe method to verify that your electrical test tool is operating properly before you conduct further tests. The concept of "Test Before Touch" (TBT) or three point test method involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

Designed for safety and compliance

Safe and easy method for verifying proper operation of your test tool before attempting to test for either an energized source or a de-energized source without the need for cumbersome PPE, or in cases where no known voltage source is available. Your environment may still require minimal PPE such as hard, safety glasses or earplugs when using a proving unit.

Applications

• Test and measurement