- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Keeping Your World Up & Running®
Keeping Your World Up & Running®
Comes in a compact design ideal for troubleshooting environments of up to 600 V, this electrical tester allows users to check voltage, continuity, and current. Additionally, this tool comes equipped with OpenJaw measurement, which enables the user to check current up to 100 A without breaking the circuit.
Comes in a compact design ideal for troubleshooting environments of up to 600 V, this electrical tester allows users to check voltage, continuity, and current. Additionally, this tool comes equipped with OpenJaw measurement, which enables the user to check current up to 100 A without breaking the circuit.
An ideal compact troubleshooting tool for up to 600 V environments, this tester is for use to check voltage, continuity, and current. Select volts, ohms, or current, and the tester will do the rest. Additionally, this instrument comes equipped with OpenJaw™ current measurement which enables users to check current up to 100 A without breaking the circuit.
Detachable SlimReach™ test probes are customized for national electrical standards. Plus, its tough test leads accept optional accessories such as clips and specialty probes. The test leads stow neatly in the back of the tester, making it easy to carry in your tool pouch. Add the optional holster and you can clip the tool onto your belt.
Features
| General Specifications | |
| Jaw Opening | 0.5" (12.9 mm) |
| Max Wire Size | 1/0 THHN Cable |
| Current Range AC RMS | 0 to 100.0 A |
| Accuracy AC Current (50/60 Hz) | 3% ± 3 counts |
| AC Response | Averaging |
| Voltage Range AC | 0 to 600 V |
| Accuracy AC Voltage | 1.5% ± 2 counts |
| Voltage Range DC | 0 to 600 V |
| Accuracy DC Voltage | 1% ± 1 count |
| Resistance Range | 0 to 1000 Ω |
| Continuity Beeper Threshold | On at <25 Ω, off at >400 Ω |
| Volts Indicator LED Threshold | Guaranteed on by 30 V AC |
| Environmental Specifications | |
| Operating Temperature | 50 to 122°F (10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C) |
| Humidity (Without Condensation) | 0 to 95% at 41 to 86°F (5 to 30°C) 0 to 75% at 86 to 104°F (30 to 40°C) 0 to 45% at 104 to 122°F (40 to 50°C) |
| Dust/Water Resistance | Yes |
| Operating Altitude | 6561.7' (2000 m) |
| Temperature Coefficient | 0.1 x (specified accuracy)/°C (<18°C or >28°C) |
| Safety Specifications | |
| Overvoltage Category | CAT III 600 V ac/dc (EN61010-1) |
| Agency Approvals | CSA, TUV and CE |
| Maximum Voltage | Between any terminal and earth ground |
| Mechanical Specifications | |
| Calibration Cycle | One-year |
| Current Sensor Opening | 0.5" (12.9 mm) |
| Low Battery Indicator | Yes |
| Battery Type | 2 x AA batteries |
| Battery Life | 200 hour zinc chloride, 400 hour alkaline |
| Dimensions | 1.2 x 2 x 8" (30.5 x 51 x 203 mm) |
| Weight | 0.66 lb (300 g) |
Click on a category to view a selection of compatible accessories with the Fluke T5-600 Voltage, Continuity and Current Tester with OpenJaw.
| General Specifications | |
| Jaw Opening | 0.5" (12.9 mm) |
| Max Wire Size | 1/0 THHN Cable |
| Current Range AC RMS | 0 to 100.0 A |
| Accuracy AC Current (50/60 Hz) | 3% ± 3 counts |
| AC Response | Averaging |
| Voltage Range AC | 0 to 600 V |
| Accuracy AC Voltage | 1.5% ± 2 counts |
| Voltage Range DC | 0 to 600 V |
| Accuracy DC Voltage | 1% ± 1 count |
| Resistance Range | 0 to 1000 Ω |
| Continuity Beeper Threshold | On at <25 Ω, off at >400 Ω |
| Volts Indicator LED Threshold | Guaranteed on by 30 V AC |
| Environmental Specifications | |
| Operating Temperature | 50 to 122°F (10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C) |
| Humidity (Without Condensation) | 0 to 95% at 41 to 86°F (5 to 30°C) 0 to 75% at 86 to 104°F (30 to 40°C) 0 to 45% at 104 to 122°F (40 to 50°C) |
| Dust/Water Resistance | Yes |
| Operating Altitude | 6561.7' (2000 m) |
| Temperature Coefficient | 0.1 x (specified accuracy)/°C (<18°C or >28°C) |
| Safety Specifications | |
| Overvoltage Category | CAT III 600 V ac/dc (EN61010-1) |
| Agency Approvals | CSA, TUV and CE |
| Maximum Voltage | Between any terminal and earth ground |
| Mechanical Specifications | |
| Calibration Cycle | One-year |
| Current Sensor Opening | 0.5" (12.9 mm) |
| Low Battery Indicator | Yes |
| Battery Type | 2 x AA batteries |
| Battery Life | 200 hour zinc chloride, 400 hour alkaline |
| Dimensions | 1.2 x 2 x 8" (30.5 x 51 x 203 mm) |
| Weight | 0.66 lb (300 g) |
Click on a category to view a selection of compatible accessories with the Fluke T5-600 Voltage, Continuity and Current Tester with OpenJaw.
