Provides accurate and repeatable results for tension, compression, break and cycle performance tests in various applications. It features a precision made servo gear head and ball screw for precise movement control. It can be operated by the keypad or through a PC via the FGT-VC software which includes data collection, graphing and statistical analysis.
Provides accurate and repeatable results for tension, compression, break and cycle performance tests in various applications. It features a precision made servo gear head and ball screw for precise movement control. It can be operated by the keypad or through a PC via the FGT-VC software which includes data collection, graphing and statistical analysis.
This product exceeds standard shipping dimensions/weight, as such it does not qualify for free shipping. We will contact you with your shipping costs.
The FGS-220VC's large measurement area plus tall 15.75" (400 mm) travel distance allow large, unique parts to be tested. A precise and consistent 0.40-15.75"/min (10-400mm/min) adjustable speed provides for slow tests or quick cycle load testing. The FGT-VC software program allows graphing of force versus distance and the ability to compare several tests on a single graph. Another great feature of the FGT-VC is the comparator mode which enables quick decision pass /fail determination, ideal for production line testing. The simple keypad combined with the intuitive on screen operation guides the user through setting up each test. Users can perform standard tests in several automatic or manually selected modes as well as choose higher-end capabilities with the additional dwell time, adjustable acceleration, plus user-defined tests with up to 5 programmed set points.
Features
Capacity | 220 lb (100kg, 1000N) |
Travel Speed | 0.40-15.75"/min(10-400mm/min) |
Speed Accuracy | ±5% |
Stroke | 15.75" (400 mm) |
Display | Dot-matrix LCD Four digit |
Operation Mode | Single (SING); Continuous (CONT); Program (PROG); Manual (MANU); Jogging (JOG) |
Communication | USB |
Input | Over load from force gauge (The stand will stop immediately, if the over load is detected by force gauge.) |
Measurement Table | 5.91 x 7.87" (150 x 200 mm) |
Temperature Limits | 32 to 113°F (0 to 45°C) |
Dimensions/Weight | 11.81 x 34.84 x 19.69" (300 x 885 x 500mm)/139 lb(63 kg) |
A global manufacturer of automotive tires contacted Nidec-Shimpo in search of a solution to help with a new process in their manufacturing.
The engineering team was in need of a simple method to determine the amount of force required by an operator to completely remove the tire's internal sealant after they come off the production line.
In order to simulate the human action of removing the sealant from the tire, it was recommended that they use a force test stand with mounted force gauge. They chose the FGS-220VC motorized test stand along with an FGV-10XY 10 lb (5 kg) capacity data-logging digital force gauge.
The object of the test was to simulate an operator removing the inner sealant by measuring the amount of force necessary to separate and remove the sealant from the inside of the tire. Utilizing the FG-M6TAP30U tape grip connected to the force gauge, the simulation was achieved with a piece of tape affixed on the sealant inside the tire. By determining the point at which the tape/sealant broke away from the tire, enabled them to determine the level of force a worker would have to apply to remove the sealant during the production process.
As a result of the testing, it was determined that approximately 8 pounds of force (3.6 kg) would be required to remove this substance from inside of the tires, well within the acceptable range a normal worker can routinely achieve and not have long term effects.
Click on a category to view a selection of compatible accessories with the SHIMPO FGS-220VC Vertical Motorized Test Stand, 220 lb (100 kg).
Capacity | 220 lb (100kg, 1000N) |
Travel Speed | 0.40-15.75"/min(10-400mm/min) |
Speed Accuracy | ±5% |
Stroke | 15.75" (400 mm) |
Display | Dot-matrix LCD Four digit |
Operation Mode | Single (SING); Continuous (CONT); Program (PROG); Manual (MANU); Jogging (JOG) |
Communication | USB |
Input | Over load from force gauge (The stand will stop immediately, if the over load is detected by force gauge.) |
Measurement Table | 5.91 x 7.87" (150 x 200 mm) |
Temperature Limits | 32 to 113°F (0 to 45°C) |
Dimensions/Weight | 11.81 x 34.84 x 19.69" (300 x 885 x 500mm)/139 lb(63 kg) |
A global manufacturer of automotive tires contacted Nidec-Shimpo in search of a solution to help with a new process in their manufacturing.
The engineering team was in need of a simple method to determine the amount of force required by an operator to completely remove the tire's internal sealant after they come off the production line.
In order to simulate the human action of removing the sealant from the tire, it was recommended that they use a force test stand with mounted force gauge. They chose the FGS-220VC motorized test stand along with an FGV-10XY 10 lb (5 kg) capacity data-logging digital force gauge.
The object of the test was to simulate an operator removing the inner sealant by measuring the amount of force necessary to separate and remove the sealant from the inside of the tire. Utilizing the FG-M6TAP30U tape grip connected to the force gauge, the simulation was achieved with a piece of tape affixed on the sealant inside the tire. By determining the point at which the tape/sealant broke away from the tire, enabled them to determine the level of force a worker would have to apply to remove the sealant during the production process.
As a result of the testing, it was determined that approximately 8 pounds of force (3.6 kg) would be required to remove this substance from inside of the tires, well within the acceptable range a normal worker can routinely achieve and not have long term effects.
Click on a category to view a selection of compatible accessories with the SHIMPO FGS-220VC Vertical Motorized Test Stand, 220 lb (100 kg).