Accuenergy AcuLink 710 Data Acquisition Server

Model: AcuLink-710

Be the first to review this product

Accuenergy AcuLink 710 Data Acquisition Server-

Downloads: datasheet

More Accuenergy Products

Ask an Expert

Accuenergy AcuLink 710 Data Acquisition Server

Model: AcuLink-710

Be the first to review this product

This data acquisition server connects Accuenergy meters and third-party sensors/devices to external enterprise IP-based systems for energy management, demand response, and smart grid programs.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Accuenergy AcuLink 810 Standard Data Acquisition Server

Model: AcuLink 810

Data acquisition server and gateway designed to collect aggregated energy data from up to 32 Modbus meters and field sensors in facilities such as water, gas, and electricity.

Learn More

Accuenergy AcuLink-710 Offers

This intelligent, flexible data acquisition server and gateway allows you to collect energy data from all Accuenergy meters, sensors and other devices as well as to connect thousands of energy metering points, benchmark energy usage and reduce energy cost.

Features

Connect between backend meters and servers, and present information in front end
Access energy information from local or remote sites
View real time performance data
Push or pull meter data to energy dashboards, kiosks and software applications
Monitor renewable energy performance and production
Monitor performance of critical systems such as lighting, HVAC, PDUs, inverters, etc
Track energy use and peak demand
Alarm notification for data points above or below target levels including SNMP Traps
Measurement and verification (M&V)
LEED/ Energy start certification

Applications

Industrial plant
Mall
Hospital
Data center
Subway, railway system
School/Campus
Smart Building

Accuenergy AcuLink-710 Specifications

Hardware
Processor	ARM9 embedded CPU
Operating System	Linux 2.6
Memory	32 MB RAM
Flash ROM	16 MB NOR Flash (expandable with USB memory device)
Interval Recording	1 to 60 minutes, user selectable (default 15 minutes)
LEDs	Ethernet, Modbus TX/RX, power, alarm
Console	2 x 16 LCD character, two push buttons
Power
Power Supply	24 VDC, 500 mA
Isolation	RJ45 Ethernet and RS-485 port are isolated to 1500 VDC from the main board. (Power and USB non-isolated)
Communication
Protocols	Modbus/RTU, Modbus/TCP, TCP/IP, PPP, HTTP/HTML, FTP, NTP, XML, SNMP-Trap
LAN	RJ45 10/100 Ethernet, full half duplex, auto polarity
USB	USB expansion port
Inputs
Serial Port	RS-485 Modbus, supports up to 32 external devices (expandable)
Physical
Dimensions	4 x 4.25 x 2" (102 x 108 x 51mm)
Weight	0.42lb (0.19kg)

Click here for complete specifications on the Accuenergy AcuLink-710

What's included with the Accuenergy AcuLink-710

Accuenergy AcuLink 710 Data Acquisition Server

datasheet for the Accuenergy AcuLink 710 Data Acquisition Server

Ask a question about Accuenergy AcuLink 710 Data Acquisition Server

Customer Reviews for the Accuenergy AcuLink-710

Description ➕➖

Accuenergy AcuLink-710 Offers

Features

Connect between backend meters and servers, and present information in front end
Access energy information from local or remote sites
View real time performance data
Push or pull meter data to energy dashboards, kiosks and software applications
Monitor renewable energy performance and production
Monitor performance of critical systems such as lighting, HVAC, PDUs, inverters, etc
Track energy use and peak demand
Alarm notification for data points above or below target levels including SNMP Traps
Measurement and verification (M&V)
LEED/ Energy start certification

Applications

Industrial plant
Mall
Hospital
Data center
Subway, railway system
School/Campus
Smart Building

Specifications ➕➖

Accuenergy AcuLink-710 Specifications

Hardware
Processor	ARM9 embedded CPU
Operating System	Linux 2.6
Memory	32 MB RAM
Flash ROM	16 MB NOR Flash (expandable with USB memory device)
Interval Recording	1 to 60 minutes, user selectable (default 15 minutes)
LEDs	Ethernet, Modbus TX/RX, power, alarm
Console	2 x 16 LCD character, two push buttons
Power
Power Supply	24 VDC, 500 mA
Isolation	RJ45 Ethernet and RS-485 port are isolated to 1500 VDC from the main board. (Power and USB non-isolated)
Communication
Protocols	Modbus/RTU, Modbus/TCP, TCP/IP, PPP, HTTP/HTML, FTP, NTP, XML, SNMP-Trap
LAN	RJ45 10/100 Ethernet, full half duplex, auto polarity
USB	USB expansion port
Inputs
Serial Port	RS-485 Modbus, supports up to 32 external devices (expandable)
Physical
Dimensions	4 x 4.25 x 2" (102 x 108 x 51mm)
Weight	0.42lb (0.19kg)