LAN cable mapping and troubleshooting tester. Indicates all common wiring faults including split pairs, shorts, opens, reversed pairs and crossed wires.
LAN cable mapping and troubleshooting tester. Indicates all common wiring faults including split pairs, shorts, opens, reversed pairs and crossed wires.
The Wire Mapper Pro® Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP and SSTP cabling equipped with RJ-45 connectors and wired to either TIA 568A/B (ISO 11801 and EN 50137), USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults.
The Model CA7028 has the ability to measure and indicate the length of the cable under test, using a Vp (Velocity of Propagation) set by the user, from a built-in library or manually. It will measure and report the length of all four pairs of wires in the cable under test. It also generates an audible tone that is transmitted into all four pairs on the cable under test.
Features
Applications
Range | 500ft (150m) |
Accuracy | ±5% |
Cable Types | UTP, STP, FTP and SSTP |
Faults Indicated | Short Circuit Pair, Open Circuit Wire, Short Between Pairs, |
Split Pairs, Crossed Pairs, Pair Reversals, Shield Continuity | Split Pairs, Crossed Pairs, Pair Reversals, Shield Continuity |
Fault Location | Near End, Remote End, or distance to fault |
Fault Display | All fault and setting info displayed textually and graphically |
Wiring Schemes | TIA 568A/B, USOC and ISDN |
Service Indication | Telephone, 10BaseT, 100Mbit+, Token Ring |
Voltage Warning | Audible and visual warning of TNV (Telecom Network Voltage) |
Test Inhibit | Inhibits testing in the presence of live voltages |
Tone Generator | Oscillating 810Hz to 1110Hz |
Battery Indicator | 0 to 100% Bargraph |
Power Source | 4 x 1.5V AA Alkaline Batteries |
Display Backlit | Blue Electroluminescent |
Remote Display | Green/Red Pass/Fail LED |
Auto-Off | After 3 minutes |
Weight | Main unit: 12 oz (350g); Remote unit: 1.5 oz (40g) |
Range | 500ft (150m) |
Accuracy | ±5% |
Cable Types | UTP, STP, FTP and SSTP |
Faults Indicated | Short Circuit Pair, Open Circuit Wire, Short Between Pairs, |
Split Pairs, Crossed Pairs, Pair Reversals, Shield Continuity | Split Pairs, Crossed Pairs, Pair Reversals, Shield Continuity |
Fault Location | Near End, Remote End, or distance to fault |
Fault Display | All fault and setting info displayed textually and graphically |
Wiring Schemes | TIA 568A/B, USOC and ISDN |
Service Indication | Telephone, 10BaseT, 100Mbit+, Token Ring |
Voltage Warning | Audible and visual warning of TNV (Telecom Network Voltage) |
Test Inhibit | Inhibits testing in the presence of live voltages |
Tone Generator | Oscillating 810Hz to 1110Hz |
Battery Indicator | 0 to 100% Bargraph |
Power Source | 4 x 1.5V AA Alkaline Batteries |
Display Backlit | Blue Electroluminescent |
Remote Display | Green/Red Pass/Fail LED |
Auto-Off | After 3 minutes |
Weight | Main unit: 12 oz (350g); Remote unit: 1.5 oz (40g) |